Original Article
  • Fabrication and Characterization of the Carbon Fiber Composite Sheets
  • Yun-Seon Lee*, Seung-A Song*, Wan Jin Kim*, Seong-Su Kim*, Yong-Sik Jung*†
  • *Department of Organic Materials & Fiber Engineering, Chonbuk National University, * Department of Organic Materials & Fiber Engineering, Chonbuk National University, Corresponding author (E-mail: psdcolor@jbnu.ac.kr)
  • 탄소섬유를 이용한 열가소성 복합재료 시트 제조 및 특성
  • 이윤선* · 송승아* · 김완진* · 김성수* · 정용식*†
Abstract
Recently, the applications of carbon fiber reinforced plastics (CFRPs) have become broader than ever when it comes to such industries as automotive, ships, aerospace and military because of their lightweight-ness and high mechanical properties. Thermosetting plastics like epoxy are frequently used as the binding matrix in CFRPs due to their high hardness, wetting characteristics and low viscosity. However, they cannot melted and remolded. For this reason, thermosetting plastic wastes have caused serious environmental problems with the production of fiber reinforced plastics. Thus, many studies have focused on the carbon fiber reinforced thermoplastics (CFRTPs) and recycling carbon fiber. In this study, recycled carbon fiber (RCF) was prepared from CFRPs using a pyrolysis method, which was employed to separate resin and carbon fiber. The degree of decomposition for epoxy resin was confirmed from thermal gravimetric analysis (TGA) and scanning electron microscope (SEM). The RCF was cut and ground to prepare a carbon fiber composite sheet (CFCS). CFCS was manufactured by applying recycled carbon fibers and various thermoplastic fibers. Various characterizations were performed, including morphological analyses of surface and cross-section, mechanical properties, and crystallization enthalpy of CFCS at different cooling conditions.

탄소섬유 강화 복합재료는 높은 비강도 및 비강성을 가지기 때문에 자동차 산업, 선박, 우주 항공 산업과 같은 다양한 산업 분야에 적용되어 왔으며, 수요가 점차 증가하고 있다. 탄소섬유 강화 복합재료에는 기지재로 주 로 에폭시(Epoxy)와 같이 점도가 낮고 젖음 특성이 우수하며 강도가 양호한 열경화성(Thermosetting) 수지가 사용 된다. 열경화성 수지는 우수한 물리적 특성을 나타내지만 재사용이 어렵다. 이러한 문제를 해결하기 위하여 재사 용이 가능한 탄소섬유 강화 열가소성 수지(Thermoplastic) 복합재료 개발 및 탄소섬유 재사용에 관한 많은 연구들 이 진행되고 있다. 본 연구에서는 열분해 방법을 사용하여 탄소섬유/에폭시 복합재료로부터 탄소섬유와 수지를 분리하여 탄소섬유를 재활용하였다. 에폭시의 분해도(Degree of decomposition)는 열중량분석기(TGA)와 시차 주 사현미경(SEM)을 통해 확인하였다. 수지로부터 분리해낸 탄소섬유는 절단(Cutting)과 그라인딩(Grinding) 방법을 거쳐 탄소섬유 복합재료 시트(Sheet)를 제조하였다. 재활용 탄소 섬유로 제조된 탄소섬유 시트는 각각 다른 냉각 조건에서 결정화 엔탈피(Crystallization enthalpy)와 기계적 특성, 표면과 단면의 형태를 분석하였다.

Keywords: Carbon fiber, Carbon fiber reinforced thermoplastic composite, Sheet molding compound, Recycled carbon fiber

Keywords: 탄소섬유,탄소섬유강화열가소성복합재료, 시트 성형, 재활용 탄소섬유

This Article

  • 2015; 28(4): 168-175

    Published on Aug 31, 2015

Correspondence to

  • E-mail: