Original Article
  • Microwave Absorbing Structure Using Semiconductive Fiber Reinforced Composite
  • Jae-Hun Choi*, Young-Woo Nam*, Chun-Gon Kim*†, Won-Jun Lee**
  • *Department of Aerospace Engineering, KAIST *†Department of Aerospace Engineering, KAIST **Agency for Defense Development (ADD)
  • 반도체 섬유 강화 복합재료를 이용한 전자파 흡수 구조
  • 최재훈* · 남영우* · 김천곤*† · 이원준**
Abstract
This paper deals with the fabrication and verification of the microwave absorbing structure using semiconductive fiber reinforced composite. Two kinds of fiber were used to fabricate composites. Electromagnetic properties of the composites were measured by freespace measurement system over X-band. Two single slab absorbers and a double slab absorber were designed by thickness optimization method. Single slab absorbers did not show good microwave absorption performance because the permittivity is away from non-reflection curve. Double slab absorber complemented the limitations on single slab absorber and it showed good microwave absorption performance. Double slab absorber showed -43.9 dB loss near 10 GHz.

본 연구에서는 반도체 섬유 강화 복합재료를 이용하여 전자파 흡수 구조를 제작하였다. 두 종류의 반도 체 섬유를 사용하여 복합재료를 제작하고, 자유공간 측정 장비를 이용하여 각각의 전자기적 물성을 측정하였다. 두께 최적화 방법으로 두 종류의 단층형 흡수 구조와 한 종류의 이층형 흡수 구조를 설계하였다. 설계한 전자파 흡수 구조를 반도체 섬유 강화 복합재료로 제작하고 그 흡수 성능을 측정하였다. 사용된 두 재료의 유전율은 Cole- Cole plot에 나타내었을 때 무반사 곡선에 가깝지 못하여 높은 흡수 성능을 기대하기 어려웠다. 두 종류의 재료로 제작한 단층형 흡수 구조는 10 GHz 근처에서 각각 -14.2 dB와 -8.8 dB의 흡수 성능을 보였다. 이러한 한계점을 보 완할 수 있는 이층형 전자파 흡수 구조는 10 GHz 근처에서 -43.9 dB의 좋은 흡수 성능을 보였다. 반도체 섬유 강 화 복합재료로 제작한 이층형 전자파 흡수 구조는 기존의 전자파 흡수 구조에 비해 간단한 제작 과정을 거쳐 좋 은 흡수 성능을 갖는 흡수 구조를 얻을 수 있었으며, 상대적으로 더 적은 오차 요인을 갖고 있다.

Keywords: Microwave absorbing structure, Semiconductive fiber , Multifunctional composite, Complex permittivity

Keywords: 전자파 흡수 구조, 반도체 섬유, 다기능 복합재료 , 복소 유전율

This Article

  • 2016; 29(3): 98-103

    Published on Jun 30, 2016

Correspondence to

  • E-mail: