Special Issue
  • Mechanical and Electrical Properties of Impact Polypropylene Ternary Blends for High-Voltage Power Cable Insulation Applications
  • Seong Hwan Lee*1, Do-Kyun Kim*1, Shin-Ki Hong*, Jin Ah Han*, Se Won Han*, Dae Ho Lee*†, Seunggun Yu*,**†

  • * Insulation Materials Research Center, Korea Electrotechnology Research Institute (KERI)
    ** Electro-functional Materials Engineering, University of Science and Technology (UST)

  • 고전압 전력케이블 절연체 응용을 위한 임팩트 폴리프로필렌 기반 3성분계 블렌드의 기계적 및 전기적 특성에 대한 연구
  • 이성환*1 ·김도균*1 ·홍신기*·한진아*·한세원*·이대호*† ·유승건*,**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Polypropylene (PP) has been received great attention as a next-generation high-voltage power cable insulation material that can replace cross-linked polyethylene (XLPE). However, the PP cannot be used alone as an insulation material because of its high elastic modulus and vulnerability to impact, and thus is mainly utilized as a form of a copolymer with rubber phases included in the polymerization step. In this paper, a soft PP-based blend was prepared through melt-mixing of impact PP, polyolefin elastomer, and propylene-ethylene random copolymer. The elastic modulus and impact strength of the blend could properly be decreased or increased, respectively, by introducing elastomeric phases. Furthermore, the blends showed a high storage modulus even at a temperature of 100ºC or higher at which the XLPE loses its mechanical properties. In addition, the blend was found to be effective in suppressing the space charge compared to the pristine PP as well as XLPE.


폴리프로필렌은 가교폴리에틸렌을 대체할 수 있는 차세대 고전압 전력케이블 절연체로써 큰 주목을 받고 있다. 하지만, 폴리프로필렌은 탄성률이 크고 충격에 취약하여 단독으로 절연체로 사용될 수 없고, 중합 단계에서 고무상이 혼재된 공중합체 형태로 주로 활용된다. 본 논문에서는 내충격성 폴리프로필렌, 폴리올레핀 탄성체, 그리고 프로필렌-에틸렌 랜덤공중합체의 용융 혼합을 통해 연성의 폴리프로필렌계 블렌드를 제조하였다. 폴리프로필렌 기재를 유지하면서도 다량의 탄성체 상들을 지니는 적정 비율의 3성분계 블렌드를 개발하였고, 탄성체 상들의 도입에 의해 폴리프로필렌의 탄성률을 감소시킬 수 있을 뿐만 아니라, 25도 및 -40도에서의 충격강도 및 연신율을 크게 증가시킬 수 있었다. 또한, 동적기계분석을 통해 가교폴리에틸렌이 기계적 물성을 손실하는 100도 이상의 온도에서도 3성분계 블렌드는 고체 형태를 유지할 수 있는 범위의 저장탄성률을 나타내었다. 뿐만 아니라, 3성분계 블렌드는 30 kV/mm의 직류 전압 인가 하에서 공간전하를 효과적으로 억제시키는데 유리한 것으로 나타났다.


Keywords: 폴리프로필렌(Polypropylene), 절연재료(Insulation materials), 블렌드(Blend), 충격강도(Impact strength), 공간전하(Space charge)

This Article

Correspondence to

  • Dae Ho Lee *, Seunggun Yu *,**
  • * Insulation Materials Research Center, Korea Electrotechnology Research Institute (KERI)
    ** Electro-functional Materials Engineering, University of Science and Technology (UST)

  • E-mail: neokatari@keri.re.kr ,viola@keri.re.kr