Original Article
  • Hydrophobicity and Adhesion of SiO2/Polyurethane Nanocomposites Topcoat for Aircraft De-icing with Different Pre-curing Time

  • Jong-Hyun Kim*, Pyeong-Su Shin*, Dong-Jun Kwon**, Joung-Man Park*†

  • * Department of Materials Engineering and Convergence Technology, Research Institute for Green Energy Convergence Technology (RIGET), Gyeongsang National University, Jinju, Korea
    ** Research Institute for Green Energy Convergence Technology (RIGET), Gyeongsang National University, Jinju, Korea

  • 선경화 시간에 따른 항공기 De-icing용 나노실리카/폴리우레탄 복합재료 탑코트의 소수성 및 접착특성 평가

  • 김종현* · 신평수* · 권동준** · 박종만*†

References
  • 1. Du, Y., Gui, Y., Xiao, C., and Yi, X., “Investigation on Heat Transfer Characteristics of Aircraft Icing Including Runback Water”, International Journal of Heat and Mass Transfer, Vol. 53, No. 19-20, 2010, pp. 3702-3707.
  •  
  • 2. Su, Q., Chang, S., Song, M., Zhao, Y., and Dang, C., “An Experimental Study on the Heat Transfer Performance of a Loop Heat Pipe System with Ethanol-water Mixture as Working Fluid for Aircraft Anti-icing”, International Journal of Heat and Mass Transfer, Vol. 139, 2019, pp. 280-292.
  •  
  • 3. Raj, L.P., Lee, J.W., and Myong, R.S., “Ice Accretion and Aerodynamic Effects on a Multi-element airfoil under SLD Icing Condi-tions”, Aerospace Science and Technology, Vol. 85, 2019, pp. 320-333.
  •  
  • 4. Cao, Y., Tan, W., and Wu, Z., “Aircraft Icing: An Ongoing Threat to Aviation Safety”, Aerospace Science and Technology, Vol. 75, 2018, pp. 353-385.
  •  
  • 5. Deng, H., Chang, S., and Song, M., “The Optimization of Simulated Icing Environment by Adjusting the Arrangement of Nozzles in an Atomization Equipment for the Anti-icing and Deicing of Aircrafts”, International Journal of Heat and Mass Transfer, Vol. 155, 2020, 119720.
  •  
  • 6. Hasan, Z., “Deicing of a Glass Fiber Reinforced Aluminum Laminate – Part 1: Experiments and Numerical Simulation”, Thermal Science and Engineering Progress, Vol. 20, 2020, pp. 100737.
  •  
  • 7. Idris, M.K., Qiu, J., Melenka, G.W., and Grau, G., “Printing Electronics Directly onto Carbon Fiber Composites: Unmanned Aerial Vehicle (UAV) Wings with Integrated Heater for De-icing”, Engineering Research Express, Vol. 2, No. 2, 2020, pp. 025022.
  •  
  • 8. Vertuccio, L., Santis, F.D., Pantani, R., Lafdi, K., and Guadagno, L., “Effective De-icing Skin Using Graphene-based Flexible Heat-er”, Composites Part B, Vol. 162, 2019, pp. 600-610.
  •  
  • 9. Cao, Y., Farha, F.I., Ge, D., Liu, X., Liu, W., Li, G., Zhang, T., and Xu, F., “Highly Effective E-heating Performance of Nickel Coated Carbon Fiber and Its Composites for De-icing Application”, Composite Structures, Vol. 229, 2019, pp. 111397.
  •  
  • 10. Wang, Y., Xu, Y., and Su, F., “Damage Accumulation Model of Ice detach Behavior in Ultrasonic De-icing Technology”, Renewable Energy, Vol. 153, 2020, pp. 1396-1405.
  •  
  • 11. Wang, Z., “Recent Progress on Ultrasonic De-icing Technique Used for Wind Power Generation, High-voltage Transmission Line and Aircraft”, Energy and Buildings, Vol. 140, 2017, pp. 42-49.
  •  
  • 12. Ji, W.T., Lu, X.D., Chen, L., Zhang, Y.W., and Tao, W.Q., “Experimental Investigation on the Ice Melting Heat Transfer with a Steam Jet Impingement Method”, International Communications in Heat and Mass Transfer, Vol. 118, 2020, pp. 104901.
  •  
  • 13. Zhou, J.Z., Lai, S.W., Xu, X.P., Chen, Y.H., Chu, W.J., and Gao, Y.M., “R&D of Equipment for Deicing by Thermal Water-jet and Mechanical Deicing Method”, Applied Mechanics and Materials, Vol. 268-270, 2012, pp. 1288-1293.
  •  
  • 14. Memon, H., Liu, J., De Focatis, D.S.A., Choi, K.S., and Hou, X., “Intrinsic Dependence of ice Adhesion Strength on Surface Rough-ness”, Surface and Coatings Technology, Vol. 385, 2020, pp. 125382.
  •  
  • 15. Lv, L., Liu, H., Zhang, W., Chen, J., and Liu, Z., “ Facile UV-curable Fabrication of Robust, Anti-icing Superhydrophobic Coatings Based on Polyurethane”, Materials Letters, Vol. 258, 2020, pp. 126653.
  •  
  • 16. Villeneuve, E., Brassard, J.D., and Volat, C., “Effect of Various Surface Coatings on De-icing/anti-icing Fluids Aerodynamic and Endurance Time Performances”, Aerospace, Vol. 6, No. 10, 2019, pp. 114.
  •  
  • 17. Li Y., Hu T., Li B., Wei, J., and Zhang J., “Totally Waterborne and Highly Durable Superamphiphobic Coatings for Anti-Icing and Anticorrosion”, Advanced Materials Interfaces, Vol. 6, No. 23, 2019, pp. 1901255.
  •  
  • 18. Qi, Y., Yang, Z., Huang, W., and Zhang, J., “Robust Superhydrophobic Surface for Anti-icing and Cooling Performance: Application of Fluorine-modified TiO2 and Fumed SiO2”, Applied Surface Science, Vol. 538, 2021, pp. 148131.
  •  
  • 19. Xu, Q., Wang, L., Fu, F., and Liu, X., “Fabrication of Fluorine-free Superhydrophobic Cotton Fabric Using Fumed Silica and Diblock Copolymer via Mist Modification”, Progress in Organic Coatings, Vol. 148, 2020, pp. 105884.
  •  
  • 20. Qi, Y., Yang, Z., Chen, T., Xi, Y., and Zhang, J., “Fabrication of Superhydrophobic Surface with Desirable Anti-icing Performance Based on Micro/nano-structures and Organosilane Groups”, Applied Surface Science, Vol. 501, 2020, pp. 144165.
  •  
  • 21. Kim, J.H., Kwon, D.J., Shin, P.S., Baek, Y.M., Park, H.S., DeVries, K.L., and Park, J.M., “Evaluation of Surface Roughness and Frost Retardancy of a Glass Fiber/unsaturated Polyester Composite”, International Journal of Heat and Mass Transfer, Vol. 130, 2019, pp. 282-289.
  •  

This Article

Correspondence to

  • Joung-Man Park

  • Department of Materials Engineering and Convergence Technology, Research Institute for Green Energy Convergence Technology (RIGET), Gyeongsang National University, Jinju, Korea

  • E-mail: jmpark@gnu.ac.kr