Original Article
  • Conductive Properties of Thermoplastic Carbon Fiber Reinforced Plastics Highly Filled with Carbon Fiber Fabrics and Conductive Carbon Fillers
  • Seong Yun Kim*† , Ye Ji Noh*, Ji-un Jang*, Seong Kyu Choi*

  • Department of Organic Materials and Textile Engineering, Jeonbuk National University, Jeonju 54896, Korea

  • 탄소섬유 직물 및 전도성 탄소 필러가 고충진 된 열가소성 탄소섬유강화플라스틱의 전도 특성
  • 김성륜*† · 노예지* · 장지운* · 최성규*

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Guarino, Maria-Vittoria, Sime, L.C., Schröeder, D., Malmierca-Vallet, I., Rosenblum, E., Ringer, M., Ridley, J., Feltham, D., Bitz, C., Steig, E.J., Wolff, E., Stoeve, J., and Sellar, A., “Sea-ice-free Arctic During the Last Interglacial Supports Fast Future Loss,” Nature Climate Change, Vol. 10, 2020, pp. 928-932.
  •  
  • 2. Kulp, S.A., and Strauss, B.H., “New Elevation Data Triple Estimates of Global Vulnerability to Sea-Level Rise and Coastal Flooding,” Nature Communications, Vol. 10, 2019, 4844.
  •  
  • 3. Gao, Y., Gao, X., and Zhang, X., “The 2°C Global Temperature Target and the Evolution of the Long-Term Goal of Addressing Climate Change—From the United Nations Framework Convention on Climate Change to the Paris Agreement,” Engineering, Vol. 3, No. 2, 2017, pp. 272-278.
  •  
  • 4. Keith, D.R., Houstonm S., and Naumov, S., “Vehicle Fleet Turnover and the Future of Fuel Economy,” Environmental Research Letters, Vol. 14, No. 2, 2019, 021001.
  •  
  • 5. Park, K., Kittelson, D.B., Zachariah, M.R., and McMurry, P.H., “Measurement of Inherent Material Density of Nanoparticle Agglomerates,” Journal of Nanoparticle Research, Vol. 6, 2004, pp. 267-272.
  •  
  • 6. Son, Y.N., Moon, J.B., Lim, G., and Kim, C.G., “Hypervelocity Impact Analysis of Composite Plate For Space Shielding System,” Composites Research, Vol. 23, No. 6, 2010, pp. 14-18.
  •  
  • 7. Moon, C.J., Lee, C.L., Kweon, J.H., Choi, J.H., Jo, M.H., and Kim, T.G., “An Experimental Study on the Mechanical Properties of High Modulus Carbon-Epoxy Composite in Salt Water Environment,” Composites Research, Vol. 21, No. 6, 2008, pp. 1-7.
  •  
  • 8. Gu, G.Y., Wang, Z.J., Kwon, D.J., and Park, J.M., “Interfacial Durability and Acoustic Properties of Transparent xGnP/PVDF/xGnP Graphite Composites Film for Acoustic Actuator,” Composites Research, Vol. 25, No. 3, 2012, pp. 70-75.
  •  
  • 9. Jang, J.U., Park, H.C., Lee, H.S., Khil, M.S., and Kim, S.Y., “Electrically and Thermally Conductive Carbon Fibre Fabric Reinforced Polymer Composites Based on Nanocarbons and an In-situ Polymerizable Cyclic Oligoester,” Scientific Reports, Vol. 8, 2018, 7659.
  •  
  • 10. Kim, H.S., Jang, J.U., Yu, J., and Kim, S.Y., “Thermal Conductivity of Polymer Composites Based on the Length of Multi-walled Carbon Nanotubes,” Composites Part B: Engineering, Vol. 79, 2015, pp. 505-512.
  •  
  • 11. Noh, Y.J., Lee, S., Kim, S.Y., and Youn, J.R., “High-speed Fabrication of Thermoplastic Carbon Fiber Fabric Composites with a Polymerizable, Low-viscosity Cyclic Butylene Terephthalate Matrix for Automotive Applications,” Macromolecular Research, Vol. 22, 2014, pp. 528-533.
  •  
  • 12. Kim, S.H., Noh, Y.J., Ko, Y.W., Kim, S.Y., and Youn, J.R., “Improved Tensile Strength and Thermal Stability of Thermoplastic Carbon Fiber Fabric Composites by Heat Induced Crystallization of in situ Polymerizable Cyclic Butylene Terephthalate Oligomers,” Polymer Engineering Science, Vol. 54, No. 9, 2014, pp. 2161-2169.
  •  
  • 13. Noh, Y.J., Kim, H.S., and Kim, S.Y., “Improved Electrical Conductivity of a Carbon Nanotube Mat Composite Prepared by In-Situ Polymerization and Compression Molding with Compression Pressure,” Carbon letters, Vol. 13, No. 4, 2012, pp. 243-247.
  •  
  • 14. Noh, Y.J., Pak, S.Y., Hwang, S.H., Hwang, J.Y., Kim, S.Y., and Youn, J.R., “Enhanced Dispersion for Electrical Percolation Behavior of Multi-walled Carbon Nanotubes in Polymer Nanocomposites Using Simple Powder Mixing and in situ Polymerization with Surface Treatment of the Fillers,” Composites Science and Technology, Vol. 89, 2013, pp. 29-37.
  •  
  • 15. Lee, H.S., Kim, S.Y., Noh, Y.J., and Kim, S.Y., “Design of Microwave Plasma and Enhanced Mechanical Properties of Thermoplastic Composites Reinforced with Microwave Plasma-treated Carbon Fiber Fabric,” Composites Part B: Engineering, Vol. 60, 2014, pp. 621-626.
  •  
  • 16. Kim, S.Y., Noh, Y.J., and Yu, J., “Improved Thermal Conductivity of Polymeric Composites Fabricated by Solvent-free Processing for the Enhanced Dispersion of Nanofillers and a Theoretical Approach for Composites Containing Multiple Heterogeneities and Geometrized Nanofillers,” Composites Science and Technology, Vol. 101, 2014, pp. 79-85.
  •  
  • 17. Kim, S.Y., Noh, Y.J., and Yu, J., “Prediction and Experimental Validation of Electrical Percolation by Applying a Modified Micromechanics Model Considering Multiple Heterogeneous Inclusions,” Composites Science and Technology, Vol. 106, 2015, pp. 156-162.
  •  
  • 18. Kim, S.Y., Noh, Y.J., and Yu, J., “Thermal Conductivity of Graphene Nanoplatelets Filled Composites Fabricated by Solvent-free Processing for the Excellent Filler Dispersion and a Theoretical Approach for the Composites Containing the Geometrized Fillers,” Composites Part A: Applied Science and Manufacturing, Vol. 69, 2015, pp. 219-225.
  •  
  • 19. Noh, Y.J., and Kim, S.Y., “Synergistic Improvement of Thermal Conductivity in Polymer Composites Filled with Pitch Based Carbon Fiber and Graphene Nanoplatelets,” Polymer Testing, Vol. 45, 2015, pp. 132-138.
  •  
  • 20. Noh, Y.J., Kim, H.S., Ku, B.C., Khil, M.S., and Kim, S.Y., “Thermal Conductivity of Polymer Composites with Geometric Characteristics of Carbon Allotropes,” Advanced Engineering Materials, Vol. 18, No. 7, 2016, pp. 1127-1132.
  •  
  • 21. Kim, H.S., Kim, J.H., Yang, C.M., and Kim, S.Y., “Synergistic Enhancement of Thermal Conductivity in Composites Filled with Expanded Graphite and Multi-walled Carbon Nanotube Fillers via Melt-compounding Based on Polymerizable Low-viscosity Oligomer Matrix,” Journal of Alloys and Compounds, Vol. 690, 2017, pp. 274-280.
  •  
  • 22. Yu, J., Cha, J.E., and Kim, S.Y., “Thermally Conductive Composite Film Filled with Highly Dispersed Graphene Nanoplatelets via Solvent-free One-step Fabrication,” Composites Part B: Engineering, Vol. 110, 2017, pp. 171-177.
  •  
  • 23. Jang, J.U., Lee, H.S., Kim, J.W., Kim, S.Y., Kim, S.H., Hwang, I., Kang, B.J., and Kang, M.K., “Facile and Cost-effective Strategy for Fabrication of Polyamide 6 Wrapped Multi-walled Carbon Nanotube via Anionic Melt Polymerization of ε-caprolactam,” Chemical Engineering Journal, Vol. 373, 2019, pp. 251-258.
  •  
  • 24. Kim, S.Y., Jang, J.U., Haile, B.F., Lee, M.W., and Yang, B., “Swarm Intelligence Integrated Micromechanical Model to Investigate Thermal Conductivity of Multi-walled Carbon Nanotube-embedded Cyclic Butylene Terephthalate Thermoplastic Nanocomposites,” Composites Part A: Applied Science and Manufacturing, Vol. 128, 2020, 105646.
  •  
  • 25. Jang, J.U., Cha, J.E., Lee S.H., Kim, J., Yang, B., Kim, S.Y., and Kim, S.H., “Enhanced Electrical and Electromagnetic Interference Shielding Properties of Uniformly Dispersed Carbon Nanotubes Filled Composite Films via Solvent-free Process Using Ring-opening Polymerization of Cyclic Butylene Terephthalate,” Polymer, Vol. 186, 2020, 122030.
  •  
  • 26. Cho, J., Lee, H., Nam, K.H., Yeo, H., Yang, C.M., Seong, D.G., Lee, D., and Kim, S.Y., “Enhanced Electrical Conductivity of Polymer Nanocomposite Based on Edge-selectively Functionalized Graphene Nanoplatelets,” Composites Science and Technology, Vol. 189, 2020, 108001.
  •  
  • 27. Jang, J.U., Lee, S.H., Kim, J., Kim, S.Y., Kim, and S.H., “Nano-bridge Effect on Thermal Conductivity of Hybrid Polymer Composites Incorporating 1D and 2D Nanocarbon Fillers,” Composites Part B: Engineering, Vol. 222, 2021, 109072.
  •  
  • 28. Park, S.M., Kim, M.S., Choi, Y.S., Lee, E.S., Yoo, H.W., and Chon, J.S., “Carbon Fiber Tow Spreading Technology and Mechanical Properties of Laminate Composites,” Composites Research, Vol. 28, No. 5, 2015, pp. 249-253.
  •  
  • 29. Balandin, A.A., “Thermal Properties of Graphene and Nanostructured Carbon Materials,” Nature Materials, Vol. 10, 2011, pp. 569-581.
  •  
  • 30. Jang, H.G., Yang, B., Khil, M.S., Kim, S.Y., and Kim, J., “Comprehensive Study of Effects of Filler Length on Mechanical, Electrical, and Thermal Properties of Multi-walled Carbon Nanotube/Polyamide 6 Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 125, 2019, 105542.
  •  
  • 31. Park, M., Lee, H., Jang, J.U., Park, J.H., Kim, C.H., Kim, S.Y., and Kim, J., “Phenyl Glycidyl Ether as an Effective Noncovalent Functionalization Agent for Multiwalled Carbon Nanotube Reinforced Polyamide 6 Nanocomposite Fibers,” Composites Science and Technology, Vol. 177, 2019, pp. 96-102.
  •  
  • 32. Cho, J., Jang, H.G., Kim, S.Y., and Yang, B., “Flexible and Coatable Insulating Silica Aerogel/Polyurethane Composites via Soft Segment Control,” Composites Science and Technology, Vol. 171, 2019, pp. 244-251.
  •  
  • 33. Kim, Y.G., Kim, H.S., Jo, S.M., Kim, S.Y., Yang, B.J., Cho, J., Lee, S., and Cha, J.E., “Thermally Insulating, Fire-retardant, Smokeless and Flexible Polyvinylidene Fluoride Nanofibers Filled with Silica Aerogels,” Chemical Engineering Journal, Vol. 351, 2018, pp. 473-481.
  •  
  • 34. Kim, H.S., Jang, J.U., Lee, H., Kim, S.Y., Kim, S.H., Kim, J., Jung, Y.C., and Yang, B.J., “Thermal Management in Polymer Composites: A Review of Physical and Structural Parameters,” Advanced Engineering Materials, Vol. 20, No. 10, 2018, 1800204.
  •  
  • 35. Kim, H.S., Kim, J.H., Kim, W.Y., Lee, H.S., Kim, S.Y., and Khil, M.S., “Volume Control of Expanded Graphite Based on Inductively Coupled Plasma and Enhanced Thermal Conductivity of Epoxy Composite by Formation of the Filler Network,” Carbon, Vol. 119, 2017, pp. 40-46.
  •  
  • 36. Yu, J., Choi, H.K., Kim, H.S., and Kim, S.Y., “Synergistic Effect of Hybrid Graphene Nanoplatelet and Multi-walled Carbon Nanotube Fillers on the Thermal Conductivity of Polymer Composites and Theoretical Modeling of the Synergistic Effect,” Composites Part A: Applied Science and Manufacturing, Vol. 88, 2016, pp. 79-85.
  •  
  • 37. Kim, H.M., Noh, Y.J., Yu, J., Kim, S.Y., and Youn, J.R., “Silica Aerogel/Polyvinyl Alcohol (PVA) Insulation Composites with Preserved Aerogel Pores Using Interfaces between the Superhydrophobic Aerogel and Hydrophilic PVA Solution,” Composites Part A: Applied Science and Manufacturing, Vol. 75, 2015, pp. 39-45.
  •  

This Article

Correspondence to

  • Seong Yun Kim
  • Department of Organic Materials and Textile Engineering, Jeonbuk National University, Jeonju 54896, Korea

  • E-mail: sykim82@jbnu.ac.kr