Original Article
  • A Study on Microstructure and Mechanical Properties of TiC/Steel Composites Fabricated by Powder Metallurgy Process

  • Jihye Lee*, **, Seungchan Cho*, Hansang Kwon**, Sang-Kwan Lee*, Sang-Bok Lee*, Daeha Kim***, Junghwan Kim*†

  • * Composites Research Division, Korea Institute of Materials Science, Changwon, Korea
    ** Department of Advanced Material Engineering, Pukyong National University, Busan 48547, Korea
    *** DAT Advanced Material, Dangjin, Korea

  • 분말야금공정으로 제조된 TiC/steel 금속복합재료의 미세조직 및 기계적 물성 연구

  • 이지혜*, ** · 조승찬* · 권한상** · 이상관* · 이상복* · 김대하*** · 김정환*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Cho, S.C., Lee, Y.H., Ko, S.M., Park, H.J., Lee, D.H., Shin, S.M., Jo, I.G., Lee, S.K., and Lee, S.B., “Fabrication of Ceramic Particulate Reinforced Steel Composites by Liquid Pressing Infiltration Process,” Composites Research, Vol. 31, No. 4, 2018, pp. 117-121.
  •  
  • 2. Shin, S.M., Park, H.J., Park, B.J., Lee, S.K., Lee, S.B., Kim, Y.D., Cho, S.C., and Jo, I.G., “Dispersion Mechanism and Mechanical Properties of SiC Reinforcement in Aluminum Matrix Composite through Stir- and Die-Casting Processes,” Applied Sciences, Vol. 11, No. 3, 2021, pp. 952.
  •  
  • 3. Lee, D.H., Cho, S.C., Kim, Y.D., Lee, S.K., Lee, S.B., and Jo, I.G., “Mechanical Properties and Wear Performance of the Al7075 Composites Reinforced with Bimodal Sized SiC Particles” Composites Research, Vol. 33, No. 5, 2020, pp. 310-315.
  •  
  • 4. Zhu, H., Ouyang, M., Hu, J., Zhang, J., and Qiu, C.J., “Design and Development of TiC-Reinforced 410 Martensitic Stainless Steel Coatings Fabricated by Laser Cladding,” Ceramics International, Vol. 47, No. 9, 2021, pp. 12505-12513.
  •  
  • 5. Lee, Y.H., Ko, S.M., Park, H.J., Lee, D.H., Shin, S.M., Jo, I.G., Lee, S.K., and Lee, S.B., Kim, Y.D., and Cho, S.C., “Effect of TiC Particle Size on High Temperature Oxidation Behavior of TiC Reinforced Stainless Steel,” Applied Surface Science, Vol. 480, pp. 951-955.
  •  
  • 6. Zhao, Z., Li, J., Bai, P., Qu, H., Liang, M., Liao, H., Wu, L., Huo, P., Liu, H., and Zhang, J., “Microstructure and Mechanical Properties of TiC-Reinforced 316L Stainless Steel Composites Fabricated Using Selective Laser Melting,” Metals, Vol. 9, No. 2, 2019, pp. 267.
  •  
  • 7. Cho, S.C., Jo, I.G., Lee, S.K., and Lee, S.B., “Microstructure and Wear Characteristics of TiC-SKD11 Composite Fabricated by Liquid Pressing Infiltration Process,” Composites Research, Vol. 30, No. 3, 2017, pp. 209-214.
  •  
  • 8. Lin, T., Guo Y., Wang, Z., Shao, H., Lu, H., Li, F., and He, X., “Effects of Chromium and Carbon Content on Microstructure and Properties of TiC-Steel Composites,” International Journal of Refractory Metals and Hard Materials, Vol. 72, 2018, pp. 228-235.
  •  
  • 9. Mourlas, A., Pavlidou, E., Vourlias, G., Rodríguez, J., and Psyllaki, P., “Concentrated Solar Energy for In-situ Elaboration of Wear-Resistant Composite Layers. Part I: TiC and Chromium Carbide Surface Enrichment of Common Steels,” Surface and Coatings Technology, Vol. 377, 2019, pp. 124882.
  •  
  • 10. Orečný, M., Buršák, M., Šebek, M., and Falat, L., “Influence of Hardness, Matrix and Carbides in Combination with Nitridation on Abrasive Wear Resistance of X210Cr12 Tool Steel,” Metals, Vol. 6, No. 10, 2016, pp. 236.
  •  
  • 11. Yu, W.T., Li, J., Shi, C.B., and Zhu. Q.T., “Effect of Titanium on the Microstructure and Mechanical Properties of High-Carbon Martensitic Stainless Steel 8Cr13MoV.” Metals, Vol. 6, No. 8, 2016, pp. 193.
  •  
  • 12. Oh, N.R., “A Study on the Tensile Characteristics of a Novel Infiltrated Steel Matrix Composite with Different Heat-treatment Conditions and Reinforcement Volume Fraction,” Master Degree Thesis, Changwon National University, Republic of Korea, 2016.
  •  
  • 13. Bettanini, M.A., Ding, L., Mithieux, J.D., Parrens, C., Idrissi, H., Schryvers, D., Delannay, L., Pardoen, T., J.Jacques, P., “Influence of M23C6 Dissolution on the Kinetics of Ferrite to Austenite Transformation in Fe-11Cr-0.06C Stainless Steel,” Materials & Design, Vol. 62, 2019, pp. 362-374.
  •  
  • 14. Hwang, J.I., Kim, S.H., Heo, Y.U., Kim, D.H., Hwang, K.C., and Suh. D.W., “Tempering Behavior of TiC-Reinforced SKD11 Steel Matrix Composite,” Metals and Materials International, Vol. 24, No. 3, 2018, pp. 644-651.
  •  
  • 15. Kim, H.Y., Kang, J.Y., Son, D.M., Lee, D.S., Lee, T.H., Jeong, W.C., and Cho, K.M., “Microstructures and Mechanical Properties of Cold-Work Tool Steels: A Comparison of 8%Cr Steel with STD11,” Journal of the Korean Society for Heat Treatment, Vol. 27, No. 5, 2014, pp. 242-252.
  •  

This Article

Correspondence to

  • Junghwan Kim

  • Composites Research Division, Korea Institute of Materials Science, Changwon, Korea

  • E-mail: jhwankim@kims.re.kr