Original Article
  • Study on Mode I Fracture Toughness and FEM analysis of Carbon/Epoxy Laminates Using Acoustic Emission Signal

  • Hyun-jun Cho*, Min-Hyeok Jeon*, Hae-Ri No*, In-Gul Kim*†

  • Department of Aerospace Eng., Chungnam National University

  • 음향 방출 신호를 이용한 탄소/에폭시 적층판의 Mode I 파괴 인성 및 유한요소해석에 관한 연구

  • 조현준*· 전민혁*· 노해리*· 김인걸*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Oskouei, A.R., and Ahmadi, M., “Acoustic Emission Characterization of Mode I Delamination in Glass/Polyester Composites”, Journal of Composite Materials, Vol. 44, No. 7, 2010, pp. 793-807.
  •  
  • 2. Yousefi, J., Mohamadi, R., Saeedifar, M., Ahmadi, M., and Hosseeini-Toudeshky, H., “Delamination Characterization in Composite Laminates Using Acoustic Emission Features, Micro Visualization and Finite Element Modeling”, Journal of Composite Material, Vol. 50, No. 22, 2016, pp. 3133-3145.
  •  
  • 3. Barile, C., Casavola, G., Pappalettera, G., and Vimalathithan, P.K., “Damage Characterization in Composite Materials Using Acoustic Emission Signal-based and Parameter-based Data”, Composite Part B, Vol. 178, 2019, 107469.
  •  
  • 4. Davila, C.G., Rose, C.A., and Camanho, P.P., “A Procedure for Superposing Linear Cohesive Laws to Represent Multiple Damage Mechanisms in The Fracture of Composites”, International Journal of Fracture, Vol. 158, 2009, pp. 211-223.
  •  
  • 5. Gong, Y., Hou, Y., Zhao, L., Li, W., Zhang, J., and Hu, N., “A Modified Mode I Cohesive Model for Delamination Growth in DCB Laminates with the Effect of Fiber Bridging”, International Journal of Mechanical Sciences, Vol. 176, 2020, 105514.
  •  
  • 6. Saeedifar, M., Najafabadi, M.A., Yousefi, J., Mohammadi, R., Toudeshky, H.H., and Minak, G., “Delamination Analysis in Composite Laminates by Means of Acoustic Emission and Bi-liner/Tri-liner Cohesive Zone Modeling,” Composite Structures, Vol. 161, 2017, pp. 505-512.
  •  
  • 7. Shokrieh, M.M., Daneshjoo, Z., and Fakoor, M., “A Modified Model for Simulation of Model I Delamination Growth in Laminated Composite Materials”, Theoretical and Applied Fracture Mechanics, Vol. 82, 2016, pp. 107-116.
  •  
  • 8. Zhao, L., Gong, Y., Zhang, J., Chen, Y., and Fei, B., “Simulation of Delamination Growth in Multidirectional Laminates under Mode I and Mixed Mode I/II Loadings Using Cohesive Elements”, Composite Structure, Vol. 116, 2014, pp. 509-522.
  •  
  • 9. Arumugam, V., Sajith, S., and Stanley, A.J., “Acoustic Emission Characterization of Failure Modes in GFRP Laminates under Mode I Delamination”, Journal of Nondestructive Evaluation, Vol. 30, 2011, pp. 213-219.
  •  
  • 10. Fotouhi, M., and Najafabadi, M.A., “Acoustic Emission-Based Study to Characterize the Initiation of Delamination in Composite Materials”, Journal of Thermoplastic Composite Materials, Vol. 29, No. 4, 2016, pp. 519-537.
  •  
  • 11. Groot, de P.J., Wijnen, P.A.M., and Janssen, R.B.F., “Real-Time Frequency Determination of Acoustic Emission for Different Fracture Mechanisms in Carbon/Epoxy Composites”, Composite Science and Technology, Vol. 55, 1995, pp. 405-412.
  •  
  • 12. Nikbakht, M., Toudeshky, H.H., and Minak, G., “Delamination Evaluation of Composite Laminates with Different Interface Fiber Orientations Using Acoustic Emission Features and Micro Visualization”, Composite Part B, Vol. 113, 2017, pp. 185-196.
  •  
  • 13. ASTM D-5528-13, “Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composite”, ASTM International, West Conshohocken, PA, 2013.
  •  

This Article

Correspondence to

  • In-Gul Kim

  • Department of Aerospace Eng., Chungnam National University

  • E-mail: igkim@cnu.ac.kr