Original Article
  • Adhesive Strength and Interface Characterization of CF/PEKK Composites with PEEK, PEI Adhesives Using High Temperature oven Welding Process
  • Seong-Jae Park*, Kyo-Moon Lee*, Soo-Jeong Park**, Yun-Hae Kim*,**†

  • * Major of Materials Engineering, Department of Marine Equipment Engineering, Korea Maritime and Ocean University
    ** Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University

  • 고온 오븐 접합을 적용한 PEEK, PEI 기반 CF/PEKK 복합재의 접착 강도 및 계면 특성 평가
  • 박성재*· 이교문*· 박수정**· 김윤해*,**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Peeters, D., Clancy, G., Oliveri, V., O’Higgins, R., Jones, D., and Weaver, P.M., “Concurrent Design and Manufacture of a Thermoplastic Composite Stiffener,” Composite Structures, Vol. 212, 2019, pp. 271-280.
  •  
  • 2. Kwon, D.J., and Seo, H.S., “Development of Eco-friendly Basalt Fiber-reinforced Furan-based Composite Material with Improved Fire and Flame Retardants for Shipbuilding and Offshore Pipe Insulation Cover,” Composite Research, Vol. 34, No. 1, 2021, pp. 57-62.
  •  
  • 3. Bae, K.M., Yim, Y.J., Yoon, S.W., Ha, J.R., and Cho, J.H., “A Study on the Application of Composites to Pipe Support Clamps for the Light-weight LNGC,” Composite Research, Vol. 34, No. 1, 2021, pp. 8-15.
  •  
  • 4. Kappenthuler, S., and Seeger, S., “Assessing the Long-term Potential of Fiber Reinforced Polymer Composites for Sustainable Marine Construction,” Journal of Ocean Engineering and Marine Energy, Vol. 7, No. 2, 2021, pp. 129-144.
  •  
  • 5. Selvaraju, S., and Ilaiyavel, S., “Applications of Composites in Marine Industry,” Journal of Engineering Research and Studies, Vol. 2, No. 2, 2011, pp. 89-91
  •  
  • 6. Kang, C.S., Yoo, M.H., Seo, M.K., and Choi, B.K., “A Study on the Bonding Process of Carbon Fiber-Thermoplastic Composite Using Induction Heating Technology,” Composite Research, Vol. 34, No. 6, 2021, pp. 421-425.
  •  
  • 7. Park, D.C., Park, C.W., Shin, D.H., and Kim, Y.H., “A Study on Crystallization of Thermoplastic Aromatic Polymer,” Composite Research, Vol. 31, No. 2, 2018, pp. 63-68.
  •  
  • 8. Kassapoglou, C., “Design and Analysis of Composite Structures: with Applications to Aerospace Structures”, John Wiley & Sons, Boboken, United States, 2013.
  •  
  • 9. August, Z., Ostrander, G.J.J.M., Michasiow, J., and Hauber, D., “Recent Developments in Automated Fiber Placement of Thermoplastic Composites,” SAMPE Journal, Vol. 50, No. 2, 2014, pp. 30-37.
  •  
  • 10. Lee, K.I., Choe, H.S., Kwak, J.W., Lee, J.S., Ju, H.W., Kweon, J.H., and Nam, Y.W., “Evaluation of Stamp Forming Process Parameters for CF/PEKK Thermoplastic Composite Using Finite Element Method,” Composite Research, Vol. 34, No. 5, 2021, pp. 296-304.
  •  
  • 11. Jogur, G., Nawaz Khan, A., Das, A., Mahajan, P., and Alagirusamy, R., “Impact Properties of Thermoplastic Composites,” Textile Progress, Vol. 50, No. 3, 2018, pp. 109-183.
  •  
  • 12. Machado, C.M., Silva, D., Vidal, C., Soares, B., and Teixeira, J.P., “A New Approach to Assess Delamination in Drilling Carbon Fibre-reinforced Epoxy Composite Materials,” The International Journal of Advanced Manufacturing Technology, Vol. 112, No. 11, 2021, pp. 3389-3398.
  •  
  • 13. Cheung, C.H., and Lin, K.Y., “Numerical Analysis of Fastener Delamination/disbond Arrest Mechanism in Aircraft Composite Structures,” Journal of Aircraft, Vol. 49, No. 2, 2012, pp. 630-635.
  •  
  • 14. Park, H.J., “Effects of Stacking Sequence and Clamping Force on the Bearing Strengths of Mechanically Fastened Joints in Composite Laminates,” Composite Structures, Vol. 53, No. 2, 2001, pp. 213-221.
  •  
  • 15. Farahani, R.D., Janier, M., and Dubé, M., “Conductive Films of Silver Nanoparticles as Novel Susceptors for Induction Welding of Thermoplastic Composites,” Nanotechnology, Vol. 29, No. 12, 2018, pp. 125701.
  •  
  • 16. Ahmad Sobri, S., Whitehead, D., Mohamed, M., Mohamed, J.J., Mohamad Amini, M.H., Hermawan, A., and Norizan, M.N., “Augmentation of the Delamination Factor in Drilling of Carbon Fibre-reinforced Polymer Composites (CFRP),” Polymers, Vol. 12, No. 11, 2020, pp. 2461.
  •  
  • 17. Babu, J., Sunny, T., Paul, N.A., Mohan, K.P., Philip, J., and Davim, J.P., “Assessment of Delamination in Composite Materials: A Review,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 230, No. 11, 2016, pp. 1990-2003.
  •  
  • 18. Zhao, T., Palardy, G., Villegas, I.F., Rans, C., Martinez, M., and Benedictus, R., “Mechanical Behaviour of Thermoplastic Composites Spot-welded and Mechanically Fastened Joints: A preliminary comparison,” Composites Part B: Engineering, Vol. 112, 2017, pp. 224-234.
  •  
  • 19. Yousefpour, A., Hojjati, M., and Immarigeon, J.P., “Fusion Bonding/welding of Thermoplastic Composites,” Journal of Thermoplastic Composite Materials, Vol. 17, No. 4, 2005, pp. 303-341.
  •  
  • 20. Costa, A.P.D., Botelho, E.C., Costa, M.L., Narita, N.E., and Tarpani, J.R., “A Review of Welding Technologies for Thermoplastic Composites in Aerospace Applications,” Journal of Aerospace Technology and Management, Vol. 4, No. 3, 2012, pp. 255-265.
  •  
  • 21. Lionetto, F., Mele, C., Leo, P., D'Ostuni, S., Balle, F., and Maffezzoli, A., “On the Delamination and Debond Suppression in Structural Joints by Z-fibre Pinning,” Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 4, 2007, pp. 1107-1115.
  •  
  • 22. Lionetto, F., Mele, C., Leo, P., D'Ostuni, S., Balle, F., and Maffezzoli, A., “Ultrasonic Spot Welding of Carbon Fiber Reinforced Epoxy Composites to Aluminum: Mechanical and Electrochemical Characterization,” Composites Part B: Engineering, Vol. 144, 2018, pp. 134-142.
  •  
  • 23. Gkikas, G., Paipetis, A., Lekatou, A., Barkoula, N.M., Sioulas, D., Canflanca, B., and Florez, S., “Corrosion and Environmental Degradation of Bonded Composite Repair,” International Journal of Structural Integrity, Vol. 4, No. 1, 2013, pp. 67-77.
  •  
  • 24. David, A.D., “Advances in Structural Adhesive Bonding”, Woodhead Publishing., Sawston, UK, 2010.
  •  
  • 25. Hu, X., Mei, S., Wang, F., Qian, J., Xie, D., Zhao, J., and Wei, J., “Implantable PEKK/tantalum Microparticles Composite with Improved Surface Performances for Regulating Cell Behaviors, Promoting Bone Formation and Osseointegration,” Bioactive Materials, Vol. 6, No. 4, 2021, pp. 928-940.
  •  
  • 26. Thull, D., Zimmer, F., Hofmann, T., Holtmannspoetter, J., Koerwien, T., and Hoffmann, M., “Investigation of Fluorine-based Release Agents for Structural Adhesive Bonding of Carbon Fibre Reinforced Plastics,” Applied Adhesion Science, Vol. 7, No. 1, 2019, pp. 1-19.
  •  
  • 27. Norman, J.J., “Toughened Composites: Symposium on Toughened Composites”, ASTM International, Pennsylvania, U.S, 1987.
  •  
  • 28. Todo, M., Nakamura, T., and Takahashi, K., “Mode II Interlaminar Fracture Behavior of Fiber Reinforced Polyamide Composites under Static and Dynamic Loading Conditions,” Journal of Reinforced Plastics and Composites, Vol. 18, No. 15, 1999, pp. 1415-1427.
  •  
  • 29. Park, S.J., “The Adhesion Properties of CF/PEKK Composites with PEI and PEEK Adhesive Film in Oven Welding Process,” Master's Thesis, Korea Maritime and Ocean University, South Korea, 2022.
  •  

This Article

Correspondence to

  • Yun-Hae Kim
  • * Major of Materials Engineering, Department of Marine Equipment Engineering, Korea Maritime and Ocean University
    ** Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University

  • E-mail: yunheak@kmou.ac.kr