Original Article
  • Analysis of Thermal Degradation Mechanism by Infrared High-speed Heating of CF-PEKK Composites in Hot Press Forming

  • Kyo-Moon Lee*, Soo-Jeong Park**, Ye-Rim Park**, Seong-Jae Park*, Yun-Hae Kim*,**†

  • * Major of Materials Engineering, Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University
    ** Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University

  • 핫프레스 공정 기반 CF-PEKK 복합재의 근적외선 고속가열에 의한 열적 열화 반응의 메커니즘 분석

  • 이교문*· 박수정**· 박예림**· 박성재*· 김윤해*,**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Park, D.C., Park, C.W., Shin, D.H., and Kim, Y.H., “A Study on Crystallization of Thermoplastic Aromatic Polymer,” Composites Research, Vol. 31, No. 2, 2018, pp. 63-68.
  •  
  • 2. Jung, H., Bae, K.J., Jin, J.U., Oh, Y., Hong, H., Youn, S.J., You, N.H., and Yu, J., “The Effect of Aqueous Polyimide Sizing Agent on PEEK Based Carbon Fiber Composites Using Experimental Techniques and Molecular Dynamics Simulations,” Functional Composites and Structures, Vol. 2, No. 2, 2020, pp. 025001.
  •  
  • 3. Troughton, M.J., Handbook of Plastics Joining: A Practical Guide, William Andrew, 2008.
  •  
  • 4. Phillips, R., Glauser, T., and Månson, J.A.E., “Thermal Stability of PEEK/carbon Fiber in Air and Its Influence on Consolidation,” Polymer Composites, Vol. 18, No. 4, 1997, pp. 500-508.
  •  
  • 5. Day, M., Suprunchuk, T., Cooney, J.D., and Wiles, D.M., “Thermal Degradation of Poly(aryl‐ether–ether‐ketone)(PEEK): A Differential Scanning Calorimetry Study,” Journal of Applied Polymer Science, Vol. 36, No. 5, 1988, pp. 1097-1106.
  •  
  • 6. Rosato, D.V., Rosato, D.V., and Rosato, M., Plastic Product Material and Process Selection Handbook, Elsevier, 2004.
  •  
  • 7. Donadei, V., Lionetto, F., Wielandt, M., Offringa, A., and Maffezzoli, A., “Effects of Blank Quality on Press-formed PEKK/carbon Composite Parts,” Materials, Vol. 11, No. 7, 2018, pp. 1063.
  •  
  • 8. Chan, C.M., and Venkatraman, S., “Crosslinking of Poly (arylene ether ketone)s 1. Rheological Behavior of the Melt and Mechanical Properties of Cured Resin,” Journal of Applied Polymer Science, Vol. 32, No. 7, 1986, pp. 5933-5943.
  •  
  • 9. Lee, K.M., “Effect of Infrared Heating Process on Surface and Bonding Properties of Thermoplastic Composites in Hot Press Forming”, Korea Maritime and Ocean University, 2022.
  •  
  • 10. Pascual, A., Toma, M., Tsotra, P., and Grob, M.C., “On the Stability of PEEK for Short Processing Cycles at High Temperatures and Oxygen Containing Atmosphere,” Polymer Degradation and Stability, Vol. 165, 2019, pp. 161-169.
  •  
  • 11. Wei, L., and McDonald, A.G., “Peroxide Induced Cross‐linking by Reactive Melt Processing of Two Biopolyesters: Poly (3‐hydroxybutyrate) and Poly(l‐lactic acid) to Improve Their Melting Processability,” Journal of Applied Polymer Science, Vol. 132, No. 13, 2015.
  •  

This Article

Correspondence to

  • Yun-Hae Kim

  • * Major of Materials Engineering, Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University
    ** Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University

  • E-mail: yunheak@kmou.ac.kr