Special Issue
  • Development of Ultra-High Temperature Ceramics

  • Sea Hoon Lee†, Min-Sung Park, Yun Zou

  • * Department of Space and Defense Materials, Korea Institute of Materials Science

  • 초고온 세라믹스의 발전 동향

  • 이세훈† · 박민성 · 저우원

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. https://www.yna.co.kr/view/AKR20220319040251009
  •  
  • 2. Nisar, A., Hassan, R., Agarwal, A., and. Balani, K., “Ultra-high Temperature Ceramics: Aspiration to Overcome Challenges in Thermal Protection Systems,” Ceramics International, Vol. 48, No. 7, 2022, pp. 8852-8881.
  •  
  • 3. Hussein, E.Q., Rashid, F.L., and Azziz, H.N., “Aerodynamic Heating Distribution for Temperature Prediction of Fast Flying Body Nose Using CFD,” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 64, No. 2, 2019, pp. 183-195.
  •  
  • 4. Winder, S.L., Mechanical Testing of Ultra-High Temperature Ceramics at 1500 C in Air - Development of an Experimental Facility and Test Method, Materials Science, Dissertation, Air Force Institute of Technology, 2015.
  •  
  • 5. https://www.reuters.com/business/aeros pace-defense/us-air-force-says-it-conducted-successful-hypersonic-weapon-test- 2022-05-17/
  •  
  • 6. https://www.yna.co.kr/view/AKR20220321044300009
  •  
  • 7. https://www.yna.co.kr/view/AKR20220320043701009
  •  
  • 8. https://www.dongascience.com/news.php?idx=51098
  •  
  • 9. https://c3harme.eu/
  •  
  • 10. https://www.aerospacemanufacturinganddesign.com/article/ge-tests-ge9x-cmc-components-012417/
  •  
  • 11. Maity, T., and Kim, Y.W., “High-temperature Strength of Liquid-phase-sintered Silicon Carbide Ceramics: A Review,” International Journal of Applied Ceramic Technology, Vol. 19, 2022, pp. 130-148.
  •  
  • 12. Malik, R., and Kim, Y.W., “Effect of AlN Addition on the Electrical Resistivity of Pressureless Sintered SiC Ceramics with B4C and C,” Journal of the American Ceramic Society, Vol. 104, No. 12, 2021, pp. 6086-6091.
  •  
  • 13. Rajpoot, S., Malik, R., and Kim, Y.W., “Low Thermal Conductivity in Porous SiC-SiO2-Al2O3-TiO2 Ceramics Induced by Multiphase Thermal Resistance,” Ceramics International, Vol. 47, No. 14, 2021, pp. 20161-20168.
  •  
  • 14. Yoon, B.L., Lee, S.H., Zhao, L., and Lee, H.S., “Nanostructured SiC Prepared by Ultra Low Temperature Densification Using Amorphous/nano-crystalline Bimodal Si-Al-C Powder,” Ceramics International, Vol. 44, No. 13, 2018, pp. 15176-15180.
  •  
  • 15. Vu, V.H., Gu, J., Kim, J.S., Lee, S.H., and Lee, H.S., “Highly Concentrated Aqueous SiC Slurry Containing Fine SiC Powder-a New Approach for Ultra-dense Green Body,” International Journal of Applied Ceramic Technology, Vol. 17, No. 2, 2020, pp. 468-475.
  •  
  • 16. https://m.yna.co.kr/view/PYH20210826112300052
  •  
  • 17. Shin, D.K., Jin, E.J., Lee, Y.J., Kwon, W.T., Kim, Y.H., Kim, S.R., and Riu, D.H., “TiO2-SiO2 Nanocomposite Fibers Prepared by Electrospinning of Ti-PCS Mixed Solution,” Korean Chemical Engineering Research, Vol. 53, No. 3, 2015, pp. 276-281.
  •  
  • 18. An, S.B., Lee, Y.J., Bang, J.W., Shin, D.G., and Kwon, W., “Preparation of Silicon Carbide Oxidation Protection Film on Carbon Thermal Insulator Using Polycarbosilane and Its Characterization,” Korean Journal of Materials Research, Vol. 27, No. 9, 2017, pp. 471-476.
  •  
  • 19. Shon, D.G., Kim, B.S., Son, H.R., and Kim, M.S., “Study on the Growth of 4H-SiC Single Crystal with High Purity SiC Fine Powder,” Journal of Korean Crystal Growth Technology, Vol. 29, No. 6, 2019, pp. 383-388.
  •  
  • 20. Kim, S., Han, I.S., Seong, Y.H., and Kim, D.K., “Mechanical Properties of C-SiC Composite Materials Fabricated by the Si-Cr Alloy Melt-infiltration Method,” Journal of Composite Materials, Vol. 49, No. 24, 2015, pp. 3057-3066.
  •  
  • 21. https://www.techbriefs.com/component/content/article/tb/pub/briefs/materials/2292
  •  
  • 22. Yamamoto, T., Kitaura, H., Kodera, Y., Ishii, T., Ohyanagi, M., and Munir, Z.A., “Consolidation of Nanostructured β-SiC by Spark Plasma Sintering,” Journal of the American Ceramic Society, Vol. 87, No. 8, 2004, pp. 1436-1441.
  •  
  • 23. Ito, A. Kanno, H., and Goto, T., “2H-SiC Films Grown by Laser Chemical Vapor Deposition,” Journal of the European Ceramic Society, Vol. 35, No. 16, 2015, pp. 4611-4615.
  •  
  • 24. Sun, Z., Qiao, X., Ren, Q., Li, W., and Wan, X., “Comparison of Two Methods for the Synthesis of SiO2/SiC Nanoparticles,” International Journal of Nanotechnololy, Vol. 12, No. 10, 2015, pp. 896-908.
  •  
  • 25. Wuchina, E., Opila, E., Opeka, M., Fahrenholtz, B., and Talmy, I., “UHTCs: Ultra-high Temperature Ceramic Materials for Extreme Environment Applications,” The Electrochemical Society Interface, Vol. 16, No. 4, 2007, pp. 30-36.
  •  
  • 26. Zhang, G.J., Guo, W.M., Ni, D.W., and Kan, W.M., “Ultrahigh Temperature Ceramics (UHTCs.based on ZrB2 and HfB2 Systems: Powder Synthesis, Densification and Mechanical Properties,” Journal of Physics: Conference Series, Vol. 176, No. 1, 2009, 012041.
  •  
  • 27. Seong, Y.H., and Kim, D.K., “Oxidation Behavior of ZrB2-xSiC Composites at 1500°C under Different Oxygen Partial Pressures,” Ceramics International, Vol. 40, No. 9, 2014, pp. 15303-15311.
  •  
  • 28. Yoo, H.I., Kim, H.S., Hong, B.G., Shin, I.C., Lim, K.H., Lim, B.J., and Moon, S.Y., “Hafnium Carbide Protective Layer Coatings on Carbon/carbon Composites Deposited with a Vacuum Plasma Spray Coating Method,” Journal of the European Ceramic Society, Vol. 36, No. 7, 2016, pp. 1581-1587.
  •  
  • 29. Chinnaraj, R.K., Hong, S.M., Kim, H.S., Oh, P.Y., and Choi, S.M., “Ablation Experiments of Ultra-high-temperature Ceramic Coating on Carbon-carbon Composite Using ICP Plasma wind Tunnel,” International Journal of Aeronautical and Space Sciences, Vol. 21, No. 4, 2020, pp. 889-905.
  •  
  • 30. Florez, R., Crespillo, M.L., He, X.Q., White, T.A., Hilmas, G., Fahrenholtz, W.G., and Graham, J., “Early Stage Oxidation of ZrC under 10 MeV Au3+ Ion-irradiation at 800 oC,” Corrosion Science, Vol. 169, 2020, 108609.
  •  
  • 31. Feng, L., Fahrenholtz, W.G., and Hilmas, G.E., “Two-step Synthesis Process for High-entropy Diboride Powders,” Journal of the American Ceramic Society, Vol. 103, No. 2, 2020, 724-730.
  •  
  • 32. Gild, J., Zhang, Y.Y., Harrington, T., Jiang, S., Hu, T., Quinn, M. C., Mellor, W.M., Zhou, N., Vecchio, K., and Luo, J., “High-entropy Metal Diborides: A New Class of High-entropy Materials and a New Type of Ultrahigh Temperature Ceramics,” Scientific Report, Vol. 6, No. 1, 2016, 37946.
  •  
  • 33. Sarker, P., Harrington, T., Toher, C., Oses, C., Samiee, M., Maria, J.P., Brenner, D.W., Vecchio, K.S., and Curtarolo, S., “High-entropy High-hardness Metal Carbides Discovered by Entropy Descriptors,” Nature Communications, Vol. 9, No. 1,2018, pp. 4980-4989.
  •  
  • 34. Monteverde, F., Grohsmeyer, R.J., Stanfield, A.D., Hilmas, G.E., and Fahrenholtz, W.G., “Densification behavior of ZrB2-MoSi2 Ceramics: The Formation and Evolution of Core-shell Solid Solution Structures,” Journal of Alloys and Compounds, Vol. 779, No. 1, 2019, pp. 950-961.
  •  
  • 35. Failla, S., Galizia, P., Fu, S., Grasso, S., and Sciti, D., “Formation of High Entropy Metal Diborides Using Arc-melting and Combinatorial Approach to Study Quinary and Quaternary Solid Solutions,” Journal of the European Ceramic Society, Vol. 40, No. 3, 2020, pp. 588-593.
  •  
  • 36. Simonenko, E.P., Simonenko, N.P., Gordeev, A.N., Kolesnikov, A.F., Lysenkov, A.S., Nagornov, I.A., Sevasyanov, V.G., and Kuznetsov, N.T., “The Effects of Subsonic and Supersonic Dissociated Air Flow on the Surface of Ultra-high-temperature HfB2-30 vol% SiC Ceramics Obtained Using the Sol-gel Method,” Journal of the European Ceramic Society, Vol. 40, No. 4, 2020, pp. 1093-1102.
  •  
  • 37. Tallarita, G., Licheri, R., Garroni, S., Orrù, R., and Cao, G., “Novel Processing Route for the Fabrication of Bulk High-entropy Metal Diborides,” Scripta Materialia, Vol. 158, No. 1, 2019, pp. 100-104.
  •  
  • 38. Zeng, Y., Wang, D.N., Xiong, X., Zhang, X., Withers, P.J., Sun, W., Smith, M., Bai, M., and Xiao, P., “Ablation-resistant Carbide Zr0.8Ti0.2C0.74B0.26 for Oxidizing Environments up to 3,000 oC,” Nature Communication, Vol. 8, No. 1, 2017, 15836.
  •  
  • 39. Ma, H.B., Zou, J., Lu, P., Zhu, J.T., Fu, Z.Q., Xu, F.F., and Zhang, G.J., “Oxygen Contamination on the Surface of ZrB2 Powders and Its Removal,” Scripta Materialia, Vol. 127, No. 1, 2017, pp. 160-164.
  •  
  • 40. Hu, D.L., Gu, H., Zou, J., Zheng, Q., and Zhang, G.J., “Core-rim Structure, Bi-solubility and a Hierarchical Phase Relationship in Hot-pressed ZrB2‒SiC‒MC Ceramics (M = Nb, Hf, Ta, W),” Journal of Materiomics, Vol. 7, No. 1, 2021, pp. 69-79.
  •  
  • 41. Wang, R.Z., Li, W.G., Ji, B.H., and Fang, D., “Fracture Strength of the Particulate-reinforced Ultra-high Temperature Ceramics Based on a Temperature Dependent Fracture Toughness Model,” Journal of the Mechanics and Physics of Solids, Vol. 107, 2017, pp. 365-378.
  •  
  • 42. Zhao, J., Xue, J.X., Liu, H.T., Wang, X.G., and Zhang, G.J., “ZrC Ceramics Incorporated with Different-sized SiC Particles,” Advances in Applied Ceramics, Vol. 117, No. 7, 2018, 383-388.
  •  
  • 43. Rueschhoff, L.M., Carney, C.M., Apostolov, Z.D., and Cinibulk, M.K., “Processing of Fiber-reinforced Ultra-high Temperature Ceramic Composites: A Review,” Ceramic Engineering & Science, Vol. 2, No. 1, 2020, pp. 22-37.
  •  
  • 44. Brenner, A.E., Peña, A.A., Phuah, X.L., Petorak, C., Thompson, B., and Trice, R.W., “Cyclic Ablation of High-emissivity Sm-doped ZrB2/SiC Coatings on Alumina Substrates,” Journal of the European Ceramic Society, Vol. 38, No. 4, 2018, pp. 1136-1142.
  •  
  • 45. Chen, B.W., Ni, D.W., Liao, C.J., Jiang, Y.L., Lu, J., and Dong, S.M., “Long-term Ablation Behavior and Mechanisms of 2D-Cf/ZrB2-SiC Composites at Temperatures up to 2400°C,” Corrosion Science, Vol. 177, No. 9, 2020, 108967.
  •  
  • 46. Xie, J., Li, K.Z., Sun, G.D., Li, H., Su, X., Han, Y., and Li, T., “Effects of Surface Structure Unit of 2D Needled Carbon Fiber Preform on the Microstructure and Ablation Properties of C/C-ZrC-SiC Composites,” Ceramics International, Vol. 45, No. 9, 2019, pp. 11912-11919.
  •  
  • 47. Chen, B.W., Ni, D.W., Wang, J.X., Jiang, Y.L., Ding, Q., Gao, L., Zhang, X.Y., Ding, Y.S., and Dong, S.M., “Ablation Behavior of Cf/ZrC-SiC-based Composites Fabricated by an Improved Reactive Melt Infiltration,” Journal of the European Ceramic Society, Vol. 39, No. 15, 2019, pp. 4617-4624.
  •  
  • 48. Vinci, A., Zoli, L., and Sciti, D., “Influence of SiC Content on the Oxidation of Carbon Fibre Reinforced ZrB2/SiC Composites at 1500 and 1650oC in Air,” Journal of the European Ceramic Society, Vol. 38, No. 11, 2018, pp. 3767-3776.
  •  
  • 49. Servadei, F., Zoli, L., Galizia, P., Vinci, A., and Sciti, D., “Development of UHTCMCs via Water Based ZrB2 Powder Slurry Infiltration and Polymer Infiltration and Pyrolysis,” Journal of the European Ceramic Society, Vol. 40, No. 15, 2020, pp. 5076-5084.
  •  
  • 50. Zoli, L., Vinci, A., Galizia, P., Gutièrrez-Gonzalez, C.F., Rivera, S., and Sciti, D., “Is Spark Plasma Sintering Suitable for the Densification of Continuous Carbon Fibre-UHTCMCs?,” Journal of the European Ceramic Society, Vol. 40, No. 7, 2020, pp. 2597- 2603.
  •  
  • 51. Failla, S., Galizia, P., Zoli, L., Vinci, A., and Sciti, D., “Toughening Effect of Non-periodic Fiber Distribution on Crack Propagation Energy of UHTC Composites,” Journal of Alloys and Compounds, Vol. 777, No. 3, 2019, pp. 612-618.
  •  
  • 52. Sciti, D., Silvestroni, L., Monteverde, F., Vinci, A., and Zoli, L., “Introduction to H2020 project C3HARME – Next Generation Ceramic Composites for Combustion Harsh Environment and Space,” Advances in Applied Ceramics, Vol. 117, 2018, pp. s70-s75.
  •  
  • 53. Patra, N., Nasiri, N., Jayaseelan, D.D., and Lee, W.E., “Thermal Properties of Cf/HfC and Cf/HfC-SiC Composites Prepared by Precursor Infiltration and Pyrolysis,” Journal of the European Ceramic Society, Vol. 38, No. 5, 2018, pp. 2297-2303.
  •  
  • 54. Rubio, V., Binner, J., Cousinet, S., Page, G.L., Ackerman, T., Hussain, A., Brown, P., and Dautremont, J., “Materials Characterization and Mechanical Properties of CrUHTC Powder Composites,” Journal of the European Ceramic Society, Vol. 39, No. 4, 2019, pp. 813-824.
  •  

This Article

Correspondence to

  • Sea Hoon Lee

  • * Department of Space and Defense Materials, Korea Institute of Materials Science

  • E-mail: seahoon1@kims.re.kr