Original Article
  • Effect of Zirconia Particle Addition on Curing Behavior of Phenolic Resins

  • Jaeho Yun*, Hanjun Kim*, Jae Min Lee**, Jong Hee Kim***, Seung Goo Lee**†

  • * Propulsion Technology Team, Daejeon Plant, Hanwha Corporation, Daejeon, 34060, Korea
    ** Department of Organic Materials Engineering, Chungnam National University, Daejeon 34134, Korea
    *** Research Institute for Applied Chemistry and Biological Engineering, Chungnam National University, Daejeon 34134, Korea

  • Zirconia 입자의 첨가가 페놀 수지의 경화거동에 미치는 영향

  • 윤재호*· 김한준*· 이재민**· 김종희***· 이승구**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Chow, S., and Steiner, P.R., “Comparisons of the Cure of Phenol-formaldehyde Novolac and Resol Systems by Differential Scanning Calorimetry,” Journal of Applied Polymer Science, Vol. 23, 1979, pp. 1973-1985.
  •  
  • 2. Park, Y.B., Yang, H.J., Kweon, J.H., Choi, J.H., and Cho, H.I., “Failure of Composite Sandwich Joints under Pull-out Loading,” Journal of the Korean Society for Composite Materials, Vol. 14, No. 1, 2011, pp. 17-23.
  •  
  • 3. Choi, M.H., and Chung, I.J., “Effect of Curing Kinetics on the Cross-link Density and Mechanical Property of Resol Type of Phenolic Resin”, Journal-Korean Institute of Chemical Engineers, Vol. 36, 1998, pp. 399-406.
  •  
  • 4. Lei, Y., Wu, Q., and Lian, K., “Cure Kinetics of Aqueous Phenol-Formaldehyde Resins Used for Oriented Strandboard Manufacturing: Analytical Technique”, Journal of Applied Polymer Science, Vol. 100, 2006, pp. 1642-1650.
  •  
  • 5. Kim, Y.C., Kang, H.C., Yeh, B.H., and Bae, J.C., “Kinetics of Pyrolysis Degradation of Cured Phenol Resin (SC-1008)”, Agency for Defense Development, 1996, pp. 137-144.
  •  
  • 6. Eom, S.Y., Seo, S.B., and Lee, K.Y., “Study on Cure Behavior of Low Temperature and Fast Cure Epoxy with Mercaptan Hardener”, Polymer(Korea), Vol. 37, 2013, pp. 240-248.
  •  
  • 7. Park, D.C., Kim, T.G., Kim, S.H., Shin, D.H., Kim, H.W., and Han, J.W., “Evaluation of Physical and Mechanical Properties based on Liquid Composite Molding”, Composites Research, Vol. 31, 2018, pp. 304-310.
  •  
  • 8. Kravchenko, O.G., Kravchenko, S.G., and Pipes, R.B., “Chemical and Thermal Shrinkage in Thermosetting Prepreg”, Composites: Part A, Vol. 80, 2016, pp. 72-81.
  •  
  • 9. Lee, Y.K., Kim, D.J., Kim, H.J., Hwang, T.S., Rafailovich, M., and Sokolov, J., “Activation Energy and curing Behavior of Resol- and Novolac-Type Phenolic Resins by Differential Scanning Calorimetry and Thermogravimetric Analysis”, Journal of Applied Polymer Science, 2003, Vol. 89, pp. 2589-2596.
  •  
  • 10. Cartié, D.D.R., Effect of Z-fibresTM on the Delamination Behaviour of Carbon Fibre/epoxy Laminates, Ph.D Thesis, Cranfield University, UK, 2000.
  •  
  • 11. Won, J.S., Lee, J.E., Kim, J.Y., Kim, Y.C., Yun, N.G., and Lee, S.G., “Study on Cure Behavior and Thermal Decompositon Characteristics of High Temperature Phenolic Resin”, KSPE Spring Conference, 2015, pp. 640-643.
  •  
  • 12. Lee, Y.K., Kim, D.J., Kim, H.J., Hwang, T.S., Rafailovich, M., and Sokolov, J., “Activation Energy and curing Behavior of Resol- and Novolac-Type Phenolic Resins by Differential Scanning Calorimetry and Thermogravimetric Analysis”, Journal of Applied Polymer Science, 2003, Vol. 89, pp. 2589-2596.
  •  
  • 13. Markovic, S., Dunjic, B., Zlatanic, A., and Djonlagic, J., “Dynamic Mechamical Analysis Study of the curing of Phenol-Formaldehyde Novolac Resins”, Journal of Applied Polymer Science, Vol. 81, 2001, pp. 1902-1903.
  •  
  • 14. Liu, Q., Wang, D., Li, Z., Li, Z., Peng, X., Liu, C., Zhang, Y., and Zheng, P., “Recent Developments in the Flame-Retardant System of Epoxy Resin”, Materials, Vol. 13, 2020, pp. 2145.
  •  
  • 15. Michon, C., Cuvelier, G., and Launay, B., “Concentration Dependence of the Critical Viscoelastic Properties of Gleatin at the Gel Point”, Pheologica Acta, Vol. 32, 1993, pp. 94-103.
  •  

This Article

Correspondence to

  • Seung Goo Lee

  • ** Department of Organic Materials Engineering, Chungnam National University, Daejeon 34134, Korea

  • E-mail: lsgoo@cnu.ac.kr