Special Issue
  • Structural Optimization of 3D Printed Composite Flight Control Surface according to Diverse Topology Shapes

  • Myeong-Kyu Kim*, Nam Seo Goo**, Hyoung-Seock Seo*†

  • * School of Naval Architecture & Ocean Engineering, University of Ulsan
    ** Department of Mechanical and Aerospace Engineering, Konkuk University

  • 다양한 위상 형상에 따른 3D 프린트 복합재료 조종면의 구조 최적화

  • 김명규* · 구남서** · 서형석*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Azarov, A.V., Antonov, F.K., Golubev, M.V., Khaziev, A.R., and Ushanov, S.A., “Composite 3D Printing for the Small Size Unmanned Aerial Vehicle Structure,” Journal of Composites Part B: Engineering, Vol. 169, 2019, pp. 157-163.
  •  
  • 2. Oh, E.Y., Lee, J.W., and Shur, J.H., “3D Printable Composite Materials: A Review and Prospective,” Journal of the Korean Society for Composite Research, Vol. 31, No. 5, 2018, pp. 192-201.
  •  
  • 3. Kristiawan, R.B., Imaduddin, F., Ariawan, D., Ubaidillah, and Arifin, Z., “A Review on the Fused Deposition Modeling (FDM) 3D Printing: Filament Processing, Materials, and Printing Parameters,” Journal of Open Engineering, Vol. 11, 2021, pp. 639-649.
  •  
  • 4. Hornick, J.F., 3D Printing Will Rock the World, CreateSpace Independent Publishing Platform, p. 10, 2015.
  •  
  • 5. Jeong, D.G., and Seo, H.S., “Study on Mechanical Performance of 3D Printed Composite Material with Topology Shape Using Finite Element Method,” Journal of Functional Composites and Structures, Vol. 3, No. 3, 2021, 035003.
  •  
  • 6. Park, H.M., Lee, G.B., Kim, J.S., Seon, C.R., and Yoon, M.H., “Experimental Validation of Topology Design Optimization Considering Lamination Direction of Three-dimensional Printing,” Journal of Korean Society for Computational Structural Engineering Institute of Korea, Vol. 35, No. 3, 2022, pp. 191-196.
  •  
  • 7. Ahn, I.H., “A Study for the Mechanical Properties with Infill Rate in FDM Process to Fabricate the Small IoT Device,” Journal of Korean Society for Internet of Things and Convergence, Vol. 6, No. 3, 2020, pp. 75-80.
  •  
  • 8. Mancuso, A., Pitarresi, G., Saporito, A., and Tumino, D., “Topological Optimization of a Structural Naval Component Manufactured in FDM,” Journal of Mechanical Engineering, 2019, pp. 451-462.
  •  
  • 9. Ramnath, B.V., Alagarraja, K., and Elanchezhian, C., “Review on Sandwich Composite and their Applications,” Journal of Materials Today: Proceedings, Vol. 16, Part. 2, 2019, pp. 859-864.
  •  
  • 10. Standard, A. S. T. M. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. ASTM D3039/D3039M, 3039, 2008.
  •  
  • 11. Standard, A. S. T. M. Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 45 Laminate. ASTM D3518/D3518M, 3518, 2008.
  •  
  • 12. Quan, F., Xin, R.H., and Goo, N.S., “Material Property Measurement of 3D Printed Carbon Fiber Composite Using a Digital Image Correction Method,” The Proceeding of the 2021 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2021), Vol. 1, 2021, pp. 777-789.
  •  
  • 13. Cheng, G., Zhidong, G., Xuan, G., and Zengshan, L., “Buckling of Honeycomb Structures under Out-of-plane Loads,” Journal of Sandwich Structures & Materials, Vol. 22, Issue. 3, 2020, pp. 797-821.
  •  

This Article

Correspondence to

  • Hyoung-Seock Seo

  • School of Naval Architecture & Ocean Engineering, University of Ulsan

  • E-mail: seohs@ulsan.ac.kr