Original Article
  • Evaluation of Mechanical Performance Considering Prolonged Length of Glass Fiber-Reinforced Composite on Structure Weakness by Thermal Stress at Secondary Barrier in Cryogenic Liquified Gas Storage

  • Yeon-Jae Jeong*, Hee-Tae Kim*, Jeong-Dae Kim*, Jeong-Hyun Kim**, Seul-Kee Kim**, Jae-Myung Lee*†

  • * Department of Naval Architecture and Ocean Engineering, Pusan National University
    ** Hydrogen Ship Technology Center, Pusan National University

  • 극저온 액화가스 화물창 2차방벽 구조 열 응력 취약 부 Prolonged 길이 고려 유리섬유 강화 복합재 기계적 물성 평가

  • 정연제*· 김희태*· 김정대*· 김정현**· 김슬기**· 이제명*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Schinas, O., and Butler, M., “Feasibility and Commercial Considerations of LNG-fueled Ships”, Ocean Eng., Vol. 122, 2016, pp. 84-96.
  •  
  • 2. Kim, J.H., and Chun, K.W., “Technical Trends of LNG Fueled Ship and Bunkering”, Korea Evaluation Institute of Industrial Technology PD Issue Report, Vol. 14, No. 10, 2014, pp. 31-39.
  •  
  • 3. Yu, Y.H., Kim, B.G., and Lee, D.G., “Cryogenic Reliability of Composite Insulation Panels for Liquefied Natural Gas (LNG) Ships”, Composite Structures, Vol. 94, No. 2, 2012, pp. 462-468.
  •  
  • 4. Esteves, A., Parise, J., and Esteves, A., “Carriage of LNG: Background and Technological Innovations”, 2016, pp. 1-40.
  •  
  • 5. Oh, D.J., Lee, J.M., Chun, M.S., and Kim, M.H., “Reliability Evaluation of a LNGC Insulation System with a Metallic Secondary Barrier”, Composite Structures, Vol. 171, 2017, pp. 43-52.
  •  
  • 6. Han, S., Rim, C.W., Cho, H., Suh, Y., Lee, J., and Lee, T.K., “Experimental Study on the Structural Behavior of Secondary Barrier of MARK-III LNG CCS”, in: Proc. Int. Conf. Offshore Mech. Arct. Eng. - OMAE, 2009.
  •  
  • 7. Jeong, Y.J., Kim, H.T., Kim, J.D., Kim, J.H., Kim, S.K., and Lee, J.M., “Evaluation of Mechanical Properties of Glass Fiber-reinforced Composites Depending on Length and Structural Anisotropy”, Results in Engineering, Vol. 17, 2023, 101000.
  •  
  • 8. Choi, S.W., Roh, J.U., Kim, M.S., and Lee, W.I., “Analysis of Two Main LNG CCS (Cargo Containment System) Insulation Boxes for Leakage Safety Using Experimentally Defined Thermal Properties”, Applied Ocean Research, Vol. 47, 2012, pp. 72-89.
  •  
  • 9. Jeong, Y.J., Kim, H.T., Kim, J.H., Kim, S.K., and Lee, J.M., “Analysis of Glass Fiber Reinforced Composites in Membrane-Type LNG Cargo Containment System for Structural Safety Using Experimentally Defined Mechanical Properties”, Composite Structures, Vol. 276, 2021, 114532. https://doi.org/10.1016/j.compstruct.2021.114532.
  •  
  • 10. P. 1421 ISO, Rubber-or Plastics-coated Fabrics-determination of Tensile Strength and Elongation at Break, ISO, 2001.
  •  
  • 11. Jeong, Y.-J., Kim, J.-D., Hwang, B.-K., Kim, H.-T., Oh, H.-G., Kim, Y.-T., Park, S.-B., and Lee, J.-M., “Evaluation of Mechanical Performance of Membrane Type Secondary Barrier Anisotropic Composites depending on Fiber Direction”, Journal of the Society of Naval Architects of Korea, Vol. 57, 2020, pp. 168-174.
  •  
  • 12. Jeong, Y.-J., Kim, H.-T., Kim, J.-D., Oh, H.-G., Kim, Y.-T., Park, S.-B., and Lee, J.-M., “A Study on Standardization of Fracture Strength of Secondary Barrier of FSB in MARK-III LNG CCS using Weibull Distribution”, Journal of the Society of Naval Architects of Korea, Vol. 58, 2021, pp. 137-143.
  •  
  • 13. A. Standard, C1239, “Standard Practice for Reporting Uniaxial Strength Data Estimating Weibull Distribution Parameters for Advance Ceramics”, ASTM Int. West Conshohocken, PA, 2001.
  •  
  • 14. He, B., Cui, W., and Du, X., “An Additive Modified Weibull Distribution”, Reliability Engineering & System Safety, Vol. 145, 2016, pp. 28-37.
  •  
  • 15. Calabria, R., and Pulcini, G., “On the Maximum Likelihood and Least-squares Estimation in the Inverse Weibull Distributions”, Statistica Applicata, Vol. 2, 1990, pp. 53-66.
  •  
  • 16. Barbero, E., Fernández-Sáez, J., and Navarro, C., “Statistical Analysis of the Mechanical Properties of Composite Materials”, Compos. Part B Eng., Vol. 31, 2000, pp. 375-381.
  •  
  • 17. Olteanu, D., and Freeman, L., “The Evaluation of Median-rank Regression and Maximum Likelihood Estimation Techniques for a Two-parameter Weibull Distribution”, Quality Engineering, Vol. 22, No. 4, 2010, pp. 256-272.
  •  
  • 18. Nr. M3101, “Rev C-Seconary Barrier Specification”, Gaztransport Tech., 2010.
  •  
  • 19. Jeong, Y.-J., Kim, H.-T., Kim, J.-D., Oh, H.-G., Kim, Y.-T., Park, S.-B., and Lee, J.-M., “Analysis of Thermomechanical Properties Considering the Thermal Expansion Anisotropy of Membrane-Type Fiber-Reinforced Composite Material”, Journal of the Society of Naval Architects of Korea, Vol. 58, 2021, pp. 17-23.
  •  
  • 20. Pan, N., “Analysis of Woven Fabric Strengths: Prediction of Fabric Strength Under Uniaxial and Biaxial Extensions”, Composites Science and Technology, Vol. 56, No. 3, 1996, pp. 311-327.
  •  
  • 21. Anderson, T.L., “Fracture Mechanics: Fundamentals and Applications”, Fourth Edition, 2017.
  •  
  • 22. Shahpurwala, A.A., and Schwartz, P., “Modeling Woven Fabric Tensile Strength Using Statistical Bundle Theory”, Textile Research Journal, Vol. 59, 1989, pp. 26-32. https://doi.org/10.1177/004051758905900104.
  •  
  • 23. Hu, J., Structure and Mechanics of Woven Fabrics, 2004.
  •  
  • 24. Szcześniak, L., Rachocki, A., and Tritt-Goc, J., “Glass Transition Temperature and Thermal Decomposition of Cellulose Powder”, Cellulose, Vol. 15, 2008, pp. 445-451.
  •  
  • 25. Vosynek, P., Návrat, T., Peč, M., Pořízka, J., and Diviš, P., “How the Decrease of Collagen or Mineral Affect the Fracture in the Turkey Long Bones”, World Academy of Science, Engineering and Technology, Vol. 8, 2014, pp. 1753-1756.
  •  

This Article

Correspondence to

  • Jae-Myung Lee

  • * Department of Naval Architecture and Ocean Engineering, Pusan National University

  • E-mail: jaemlee@pusan.ac.kr