Original Article
  • Prediction of Curing Deformation in CFRP Composite Structure Using Convolutional Neural Network Model

  • Yuseon Lee*, **, Dong-Hyeop Kim**, ***, Sang-Woo Kim**, ****†

  • *Department of Smart Air Mobility, Korea Aerospace University
    **Department of Aerospace and Mechanical Engineering, Korea Aerospace University
    ***Research Institute for Aerospace Engineering and Technology, Korea Aerospace University
    ****Department of Aeronautical and Astronautical Engineering, Korea Aerospace University

  • 합성곱 신경망 모델을 이용한 CFRP 복합재 구조의 경화 변형 예측

  • 이유선*, ** · 김동협**, *** · 김상우**, ****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Dhiman, B., Guleria, V., and Sharma, P., “Applications and Future Trends of Carbon Fiber Reinforced Polymer Composites: A Review,” International Research Journal of Engineering and Technology, Vol. 7, No. 10, 2020, pp. 1883-1889.
  •  
  • 2. Al-Dhaheri, M., Khan, K.A., Umer, R., Van Liempt, F., and Cantwell, W.J., “Process-Induced Deformation in U-Shaped Honeycomb Aerospace Composite Structures,” Composite Structures, Vol. 248, 2020, 112503.
  •  
  • 3. Kim, D.H., Kim, S.W., Kim, H.G., Kim, S., and Shin, B.K., “Study on verification methodology of airworthiness requirements for bird strike on civilian helicopter based on numerical analysis,” Journal of Aerospace System Engineering, Vol. 13, No. 6, 2019, pp. 70-79.
  •  
  • 4. Baek, S.M., Lim, S.J., Kim, M.S., Ko, M.G., and Park, C.I., “A Study on the Mechanical Properties of CFRP Orthogonal Lattice Structures,” Composites Research, Vol. 31, No. 2, 2018, pp. 69-75.
  •  
  • 5. Kim, Y.S., and Kim, W.D., “A Study on the Deformation Induced by Thermal Residual Stress after Composite Molding,” Composites Research, Vol. 30, No. 6, 2017, pp. 410-415.
  •  
  • 6. Shokrollahi, Y., Nikahd, M.M., Gholami, K., and Azamara, G., “Deep Learning Techniques for Predicting Stress Fields in Composite Materials: A Superior Alternative to Finite Element Analysis,” Journal of Composites Science, Vol. 7, No. 8, 2023, pp. 311-323.
  •  
  • 7. Wang, Y., Soutis, C., Ando, D., Sutou, Y., and Narita, F., “Application of Deep Neural Network Learning in Composites Design,” European Journal of Materials, Vol. 2, No. 1, 2022, pp. 117-170.
  •  
  • 8. Seong, D.Y., and Kim, W.D., “Thermal Deformation Analysis of L-Shaped Composite During Cure Process by Viscoelastic Model,” Composites Research, Vol. 33, No. 4, 2020, pp. 220-227.
  •  
  • 9. Lee, H.J., and Kim, W.D., “Residual Deformation Analysis of Composite by 3-D Viscoelastic Model Considering Mold Effect,” Composites Research, Vol. 34, No. 6, 2021, pp. 426-433.
  •  
  • 10. Hou, J., You, B., Xu, J., and Wang, T., “Prediction of Curing Process for Thermosetting Prepreg Compression Molding Process Based on Machine Learning,” Polymer Composites, Vol. 43, No. 3, 2022, pp. 1749-1762.
  •  
  • 11. Fan, S., Zhang, J., Wang, B., Chen, J., Yang, W., Liu, W., and Li, Y., “A Deep Learning Method for Fast Predicting Curing Process-Induced Deformation of Aeronautical Composite Structures,” Composites Science and Technology, Vol. 232, 2023, 109844.
  •  
  • 12. Liu, Q., Wang, X., Guan, Z., and Li, Z., “Rapid Prediction and Parameter Evaluation of Process-Induced Deformation in L-Shape Structures Based on Feature Selection and Artificial Neural Networks,” Journal of Composites Science, Vol. 8, No. 11, 2024, p. 455.
  •  
  • 13. Lee, Y., Kim, D.H., Kim, S.W., and Lee, S.Y., “Prediction of Process-Induced Spring-Back of CFRP Composite Structure Using Deep Neural Network,” Journal of Aerospace System Engineering, Vol. 18, No. 5, 2024, pp. 73-80.
  •  
  • 14. Kim, D.H., Kim, S.W., and Lee, I., “Evaluation of Curing Process-Induced Deformation in Plain Woven Composite Structures Based on Cure Kinetics Considering Various Fabric Parameters,” Composite Structures, Vol. 287, 2022, 115379.
  •  
  • 15. Lee, W.I., Loos, A.C., and Springer, G.S., “Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin,” Journal of Composite Materials, Vol. 16, No. 6, 1982, pp. 510-520.
  •  
  • 16. Liu, X., Guan, Z., Wang, X., et al., “Study on Cure-Induced Residual Stresses and Spring-In Deformation of L-Shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation,” Composite Structures, Vol. 272, 2021, 114203.
  •  
  • 17. Chen, W., and Zhang, D., “A Micromechanics-Based Processing Model for Predicting Residual Stress in Fiber-Reinforced Polymer Matrix Composites,” Composite Structures, Vol. 204, 2018, pp. 153-166.
  •  

This Article

Correspondence to

  • Sang-Woo Kim

  • **Department of Aerospace and Mechanical Engineering, Korea Aerospace University
    ****Department of Aeronautical and Astronautical Engineering, Korea Aerospace University

  • E-mail: swkim@kau.ac.kr