Original Article
  • Finite Element Analysis of Stress Responses in Biaxial Specimen Geometries

  • Yoonsub Woo*, Hyungbum Park*†

  • *Department of Mechanical Engineering, Incheon National University

  • 유한요소해석 기반 이축변형시편 형상에 따른 응력 거동 평가

  • 우윤섭* · 박형범*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Kim, J.Y., and Park, H.B., “Evaluation of Yield Surfaces of Epoxy Polymers Considering the Influence of Crosslinking Ratio: A Molecular Dynamics Study,” Composites Research, Vol. 36, No. 5, 2023, pp. 369-376.
  •  
  • 2. Chang, S.-H., “Microscopic Observation of Draped Composite Materials : Bias Extension and Biaxial Tests,” Composites Research, Vol. 17, No. 1, 2004, pp. 38-46.
  •  
  • 3. Meng, Y., et al., “Identification of True Stress-strain Curve of Thermoplastic Polymers Under Biaxial Tension,” SAE International Journal of Materials and Manufacturing, Vol. 9, No. 3, 2016, pp. 768-775.
  •  
  • 4. Creuziger, A., et al., “Insights into Cruciform Sample Design,” JOM, Vol. 69, No. 5, 2017, pp. 902-906.
  •  
  • 5. Lamkanfi, E., et al., “Strain Distribution in Cruciform Specimens Subjected to Biaxial Loading Conditions. Part 2: Influence of Geometrical Discontinuities,” Polymer Testing, Vol. 29, No. 1, 2010, pp. 132-138.
  •  
  • 6. Lu, Z., et al., “Optimization Design of a Small-Sized Cruciform Specimen for Biaxial Fatigue Testing,” Metals, Vol. 10, No. 9, 2020, pp. 1148.
  •  
  • 7. Baptista, R., et al., “Optimization of Cruciform Specimens for Biaxial Fatigue Loading with Direct Multi Search,” Theoretical and Applied Fracture Mechanics, Vol. 80, 2015, pp. 65-72.
  •  
  • 8. Makris, A., et al., “Shape Optimisation of a Biaxially Loaded Cruciform Specimen,” Polymer Testing, Vol. 29, No. 2, 2010, pp. 216-223.
  •  
  • 9. Zhao, K., et al., “Design of a Biaxial Tensile Testing Device and Cruciform Specimens for Large Plastic Deformation in the Central Zone,” Journal of Materials Science, Vol. 54, No. 9, 2019, pp. 7231-7245.
  •  
  • 10. Correa, E., et al., “Design for a Cruciform Coupon Used for Tensile Biaxial Transverse Tests on Composite Materials,” Composites Science and Technology, Vol. 145, 2017, pp. 138-148.
  •  
  • 11. Upadhyay, M.V., et al., “Stresses and Strains in Cruciform Samples Deformed in Tension,” Exp Mech, Vol. 57, No. 6, 2017, pp. 905-920.
  •  
  • 12. Zhu, Z., et al., “Optimal Design of a Miniaturized Cruciform Specimen for Biaxial Testing of TA2 Alloys,” Metals, Vol. 9, No. 8, 2019, pp. 823.
  •  
  • 13. Park, H., et al., “Characterizing the Biaxial Compressive Deformation Behavior of epoxy Polymer Through Cruciform Experiment and Finite Element Analysis,” Composite Structures, Vol. 305, 2023, pp. 116488.
  •  
  • 14. Horta Munoz, S. and Serna Moreno, M.D.C., “Advances in Cruciform Biaxial Testing of Fibre-Reinforced Polymers,” Polymers (Basel), Vol. 14, No. 4, 2022, pp. 686.
  •  
  • 15. Park, S.-M., et al., “Numerical Investigation of the Progressive Failure Behavior of the Composite Dovetail Specimens under a Tensile Load,” Composites Research, Vol. 34, No. 6, 2021, pp. 337-344.
  •  
  • 16. Smits, A., et al., “Design of a Cruciform Specimen for Biaxial Testing Of Fibre Reinforced Composite Laminates,” Composites Science and Technology, Vol. 66, No. 7-8, 2006, pp. 964-975.
  •  
  • 17. Tang, J., et al., “Failure Analysis of Plain Woven Glass/epoxy Laminates: Comparison of Off-axis And Biaxial Tension Loadings,” Polymer Testing, Vol. 60, 2017, pp. 307-320.
  •  
  • 18. Lang, J., et al., “Investigations of Cruciform Specimen Designs for Biaxial Tensile Testing of SMC,” in Proceedings. MDPI, 2018.
  •  
  • 19. Lamkanfi, E., Van Paepegem, W., and Degrieck, J., “Shape Optimization of a Cruciform Geometry for Biaxial Testing of Polymers,” Polymer Testing, Vol. 41, 2015, pp. 7-16.
  •  
  • 20. Kobeissi, A., et al., “Strength Characterization of Glass/epoxy Plain Weave Composite under Different Biaxial Loading Ratios,” Journal of Composite Materials, Vol. 54, No. 19, 2020, pp. 2549-2563.
  •  
  • 21. Moncy, A., et al., “Understanding the Effect of Anisotropy in Composite Materials on the Performance of Cruciform Specimens,” Composite Structures, Vol. 273, 2021, pp. 114225.
  •  
  • 22. Youssef, Y., et al., “Specimen Design, Manufacturing and Testing Procedures for Flat Carbon Fiber Reinforced Plastic Laminates under Biaxial Loading,” Polymer Composites, Vol. 19, No. 3, 1998, pp. 257-263.
  •  
  • 23. Escárpita, D.A.A., et al., “Biaxial Tensile Strength Characterization of Textile Composite Materials,” in Composites and Their Properties, IntechOpen, 2012.
  •  
  • 24. Xu, C., et al., “Experimental Investigation on the Mechanical Behaviour of 3D Carbon/carbon Composites under Biaxial Compression,” Composite Structures, Vol. 188, 2018, pp. 7-14.
  •  
  • 25. Ma, X., et al., “Synthesis and Mechanical Properties of the Epoxy Resin Composites Filled with Sol-gel Derived ZrO2 Nanoparticles,” Journal of Sol-Gel Science and Technology, Vol. 88, 2018, pp. 442-453.
  •  
  • 26. Le, C., et al., “Stress-based Topology Optimization for Continua,” Structural and Multidisciplinary Optimization, Vol. 41, 2010, pp. 605-620.
  •  

This Article

Correspondence to

  • Hyungbum Park

  • Department of Mechanical Engineering, Incheon National University

  • E-mail: gamamle@inu.ac.kr