Special Issue
  • Effect of CFRP Recycling Techniques on the Physical Properties of Recovered Carbon Fibers

  • Jisu Jeong*, Munju Goh*†

  • * Department of Chemical Engineering, Konkuk University, Korea

  • CFRP 재활용 기술이 회수된 탄소 섬유의 물리적 특성에 미치는 영향

  • 정지수* · 고문주*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Pakdel, E., Kashi, S., Varley, R., and Wang, X., “Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes,” Resour. Conserv. Recycl, Vol. 166, 2021, 105340.
  •  
  • 2. Liu, W., Huang, H., Zhu, L., and Liu, Z., “Integrating carbon fiber reclamation and additive manufacturing for recycling CFRP waste,” Compos. B Eng., Vol. 215, 2021, 108808.
  •  
  • 3. Vo Dong, P.A., Azzaro-Pantel, C., and Cadene, A.-L., “Economic and environmental assessment of recovery and disposal pathways for CFRP waste management,” Resour. Conserv. Recycl, Vol. 133, 2018, pp. 63–75.
  •  
  • 4. Li, Y., Wu, Y., Li, K., Lin, H., Wang, M., Zheng, L., and Wu, C., Zhang, X., “Recycling of epoxy resins with degradable structures or dynamic cross-linking networks: a review,” Ind. Eng. Chem. Res., Vol. 63, 2024, pp. 5005–5027.
  •  
  • 5. Kim, K.-W., Kim, D.-K., Han, W., and Kim, B.-J., “Comparison of the characteristics of recycled carbon fibers/polymer composites by different recycling techniques,” Molecules,Vol. 27, 2022, 5663.
  •  
  • 6. Ateeq, M., “A state of art review on recycling and remanufacturing of the carbon fiber from carbon fiber polymer composite,” Compos. Part C Open Access, Vol. 12, 2023, 100412.
  •  
  • 7. Zabihi, O., Ahmadi, M., Liu, C., Mahmoodi, R., Li, Q., and Naebe, M., “Development of a low cost and green microwave assisted approach towards the circular carbon fibre composites,” Compos. B Eng., Vol.184, 2020, 107750.
  •  
  • 8. Kim, D.H., Lee, M., and Goh, M., “Enhanced and Eco-friendly recycling of carbon-fiber- reinforced plastics using water at ambient pressure,” ACS Sustain. Chem. Eng., Vol. 8, No. 6, 2020, pp. 2433–2440.
  •  
  • 9. Kim, D.H., Yu, A., and Goh, M., “Oxidative chemical depolymerization of thermoset epoxy resin for green recycling,” J. Ind. Eng. Chem., Vol. 96, 2021, pp. 76–81.
  •  
  • 10. Liang, Y.-C., Zhang, X.-H., Wei, X.-H., Jing, D.-Q., Su, W.-G., and Zhang, S.-C., “Contribution of surface roughness and oxygen-containing groups to the interfacial shear strength of carbon fiber/epoxy resin composites,” N. Carbon Mater., Vol. 38, No. 6, 2023, pp. 1116–1126.
  •  
  • 11. Liu, Y.-N., Li, M., Gu, Y., Zhang, X., Zhao, J., Li, Q., and Zhang, Z., “The interfacial strength and fracture characteristics of ethanol and polymer modified carbon nanotube fibers in their epoxy composites,” Carbon N. Y, Vol. 52, 2013, pp. 550–558.
  •  
  • 12. Ma, C., Sánchez-Rodríguez, D., and Kamo, T., “Influence of thermal treatment on the properties of carbon fiber reinforced plastics under various conditions,” Polym. Degrad. Stab., Vol. 178, 2020, 109199.
  •  
  • 13. Obunai, K., and Okubo, K., “Mechanical characteristics of reclaimed carbon fibre under superheated steam atmosphere and its feasibility for remanufacturing CFRP/CFRTP,” Compos. Part A Appl. Sci. Manuf., Vol. 176, 2024, 107843.
  •  
  • 14. Gamstedt, E.K., and Talreja, R., “Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics,” J. Mater. Sci., Vol. 34, 1999, pp. 2535–2546.
  •  
  • 15. Gomez, C., Salvatori, D., Caglar, B., Trigueira, R., Orange, G, and. Michaud, V., “Resin transfer molding of high-fluidity polyamide-6 with modified glass-fabric preforms,” Compos. Part A Appl. Sci. Manuf., Vol. 147, 2021, 106448.
  •  
  • 16. Zhu, Y., Ma, Y., Yan, C., Xu, H., Liu, D., Chen, G., Shi, P., Hu, J., and Gao, C., “Improved interfacial shear strength of CF/PA6 and CF/epoxy composites by grafting graphene oxide onto carbon fiber surface with hyperbranched polyglycerol,” Surf. Interface Anal., Vol. 53, No. 10, 2021, pp. 831–843.
  •  
  • 17. Wu, Q., Zhao, R., Zhu, J., and Wang, F., “Interfacial improvement of carbon fiber reinforced epoxy composites by tuning the content of curing agent in sizing agent,” Appl. Surf. Sci., Vol. 504, 2020, 144384.
  •  
  • 18. Sun, N., Zhu, B., Cai, X., Yu, L., Yuan, X., and Zhang, Y., “Enhanced interfacial properties of carbon Fiber/Polyamide composites by In-situ synthesis of polyamide 6 on carbon fiber surface,” Appl. Surf. Sci., Vol. 599, 2022, 153889.
  •  
  • 19. Sakai, A., Kurniawan, W., and Kubouchi, M., “Recycled carbon fibers with improved physical properties recovered from CFRP by nitric acid,” Appl. Sci., Vol. 13, No. 6, 2023, 3957.
  •  
  • 20. Yu, J., Meng, L., Fan, D., Zhang, C., Yu, F., and Huang, Y., “The oxidation of carbon fibers through K2S2O8/AgNO3 system that preserves fiber tensile strength,” Compos. B Eng., Vol. 60, 2014, pp. 261–267.
  •  

This Article

Correspondence to

  • Munju Goh

  • Department of Chemical Engineering, Konkuk University, Korea

  • E-mail: mgoh@konkuk.ac.kr