Original Article
  • Improvement of Mechanical Properties of Polyamide-Nylon 6 by Addition of Nanomaterials

  • Seung Jun Yeo*, **, Ji Hoon Kim**† , Man Tae Kim*†

  • * Aerospace Convergence Materials Center, Korea Institute of Ceramic Engineering & Technology
    ** School of Mechanical Engineering, Pusan National University

  • 나노 소재 첨가에 따른 Polyamide-Nylon 6 기반 고분자 복합재의 기계적 특성에 관한 연구

  • 여승준*, ** · 김지훈**† · 김만태*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Lee, Y. S., Song, S. A., Kim, W. J., Kim, S. S., and Jung, Y. S., “Fabrication and characterization of the carbon fiber composite sheets,” Composites Research, Vol. 28, No. 4, 2015, pp. 168–175. doi: 10.7234/composres.2015.28.4.168
  •  
  • 2. Qiao, Y., Fring, L. D., Pallaka, M. R., and Simmons, K. L., “A review of the fabrication methods and mechanical behavior of continuous thermoplastic polymer fiber–thermoplastic polymer matrix composites,” Polymer Composites, Vol. 44, No. 2, 2022, pp. 694–733. doi: 10.1002/pc.27139
  •  
  • 3. Valino, A. D., Dizon, J. R., Espera, A. H., Chen, Q., Messman, J., and Advincula, R. C., “Advances in 3D printing of thermoplastic polymer composites and nanocomposites,” Progress in Polymer Science, Vol. 98, 2019, p. 101162. doi: 10.1016/j.progpolymsci.2019.101162
  •  
  • 4. Sorrentino, L., de Vasconcellos, D. S., D’Auria, M., Sarasini, F., and Tirillò, J., “Effect of temperature on static and low velocity impact properties of thermoplastic composites,” Composites Part B: Engineering, Vol. 113, 2017, pp. 100–110. doi: 10.1016/j.compositesb.2017.01.010
  •  
  • 5. Fedulov, B. N., Safonov, A. A., Kantor, M. M., and Lomov, S. V., “Modelling of thermoplastic polymer failure in fiber reinforced composites,” Composite Structures, Vol. 163, 2017, pp. 293–301. doi:10.1016/j.compstruct.2016.11.091
  •  
  • 6. Rivadeneira-Velasco, K. E., et al., “Green nanocomposites based on thermoplastic starch: A Review,” Polymers, Vol. 13, No. 19, 2021, p. 3227. doi:10.3390/polym13193227
  •  
  • 7. Sathyanarayana, S., and Hübner, C., “Thermoplastic nanocomposites with carbon nanotubes,” Engineering Materials, 2013, pp. 19–60. doi: 10.1007/978-3-642-40322-4_2
  •  
  • 8. Socher, R., Krause, B., Müller, M. T., Boldt, R., and Pötschke, P., “The influence of matrix viscosity on MWCNT dispersion and electrical properties in different thermoplastic nanocomposites,” Polymer, Vol. 53, No. 2, 2012, pp. 495–504. doi: 10.1016/j.polymer.2011.12.019
  •  
  • 9. Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M. H., and Dobious, C., “Effect of carbon nanotube on PA6/Eco Composites: Morphology development, rheological, and thermal properties,” Journal of Applied Polymer Science, Vol. 135, No. 12, 2017. doi: 10.1002/app.45977
  •  
  • 10. Sathees Kumar, S., and Kanagaraj, G., “Investigation on mechanical and tribological behaviors of PA6 and graphite-reinforced PA6 polymer composites,” Arabian Journal for Science and Engineering, Vol. 41, No. 11, 2016, pp. 4347–4357. doi: 10.1007/s13369-016-2126-2
  •  
  • 11. Park, K. S., Kim, S. J., Kim, J. H., Park, J. H., and Kwon, O. K., “Modification of carbon nanotube for the improvement of dispersion and the dispersion characteristics of carbon nanotube in polyurethane,” Textile Coloration and Finishing, Vol. 22, No. 1, 2010, pp. 43–50. doi: 10.5764/tcf.2010.22.1.043
  •  
  • 12. Ma, P. C., Kim, J.-K., and Tang, B. Z., “Effects of silane functionalization on the properties of carbon nanotube/epoxy nanocomposites,” Composites Science and Technology, Vol. 67, No. 14, 2007, pp. 2965–2972. doi: 10.1016/j.compscitech.2007. 05.006
  •  
  • 13. Kim, M. T., Rhee, K. Y., Jung, I., Park, S. J., and Hui, D., “Influence of seawater absorption on the vibration damping characteristics and fracture behaviors of basalt/CNT/epoxy multiscale composites,” Composites Part B: Engineering, Vol. 63, 2014, pp. 61–66. doi: 10.1016/j.compositesb.2011.02.005
  •  
  • 14. Kim, M. T., and Rhee, K. Y., “Flexural behavior of carbon nanotube-modified epoxy/basalt composites,” Carbon Letters, Vol. 12, No. 3, 2011, pp. 177–179. doi: 10.5714/cl.2011.12.3.177
  •  
  • 15. Kim, M. T., Rhee, K. Y., Lee, J. H., Hui, D., and Lau, A. K. T., “Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes,” Composites Part B: Engineering, Vol. 42, No. 5, 2011, pp. 1257–1261. doi: 10.1016/j.compositesb. 2014.03.010
  •  
  • 16. Wang, M., et al., “Significantly improved interfacial and overall mechanical properties of aramid fiber/phenolic resin matrix composite reinforced with short CNT,” Journal of Materials Research and Technology, Vol. 26, 2023, pp. 5225–5235. doi: 10.1016/j.jmrt.2023.08.281
  •  
  • 17. Yeo, S. J., Shin, H. R., Noh, W. S., and Kim, M. T., “Effect of Adding Graphene/Carbon Nanotubes (FCN) on the Mechanical Properties of Polyamide-Nylon 6,” Journal of Korean Society of Industry Convergence, Vol. 26, No. 6, 2023, pp. 1297–1303. doi:10.21289/KSIC.2023.26.6.1297
  •  
  • 18. Hemmati, M., Rahimi, G. H., Kaganj, A. B., Sepehri, S., and Rashidi, A. M., “Rheological and mechanical characterization of multi-walled carbon nanotubes/polypropylene nanocomposites,” Journal of Macromolecular Science, Part B, Vol. 47, No. 6, 2008, pp. 1176–1187. doi: 10.1080/00222340802403396
  •  
  • 19. Sezer Hicyilmaz, A., and Celik Bedeloglu, A., “Electromagnetic interference shielding thermoplastic composites reinforced with carbon based hybrid materials: A Review,” Composite Interfaces, Vol. 29, No. 13, 2022, pp. 1413–1470. doi: 10.1080/09276440.2022.2098617
  •  

This Article

Correspondence to

  • Ji Hoon Kim ** , Man Tae Kim *

  • * Aerospace Convergence Materials Center, Korea Institute of Ceramic Engineering & Technology
    ** School of Mechanical Engineering, Pusan National University

  • E-mail: kimjh@pusan.ac.kr, ginggiscan@kicet.re.kr