Special Issue
  • Effect of Si Content on the Mechanical and Wear Properties of TiC/Fe Metal Matrix Composites for Bearing Applications

  • HyeonJae Park*, **, Sangmin Shin*, Taeho Lee*, **, Seungchan Cho*, Sang-Bok Lee*, Sang-Kwan Lee*, Yangdo Kim**, Junghwan Kim*†

  • * Composites & Convergence Materials Research Division, Korea Institute of Materials Science, Changwon, Korea
    ** School of Materials and Science Engineering, Pusan National University, Busan, Korea

  • Si 함량에 따른 베어링용 TiC/Fe 금속복합재의 기계적 및 마모 특성 연구

  • 박현재*, ** · 신상민* · 이태호*, ** · 조승찬* · 이상복* · 이상관* · 김양도** · 김정환*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.


References
  • 1. Danladi, K.G., Gift, O.L., and Muhammad, A.B., “An Overview of Engineering Bearings, Types, and Applications,” Global Journal of Research in Engineering & Computer Sciences, Vol. 04, No. 4, 2024, pp. 54-60.
  •  
  • 2. Kim, M.G., Seo, K.J., N, J.H., and Kim, D.E., “Study on Tribological Characteristics of Machine Componentin Boundary Lubrication,” Tribology and Lubricants, Vol. 35, No. 6, 2019, pp. 356-361.
  •  
  • 3. Cho, S.C., Jo, I.G., Lee, S.K., and Lee, S.B., “Microstructure and Wear Characteristics of TiC-SKD11 Composite Fabricated by Liquid Pressing Infiltration Process,” Journal of the Korean Society for Composite Materials, Vol. 30, No. 3, 2017, pp. 209-214.
  •  
  • 4. Lee, J.H., Cho, S.C., Kwon, H.S., Lee, S.K., Lee, S.B., Kim, D.H., and Kim, J.H., “A Study on Microstructure and Mechanical Properties of TiC/Steel Composites Fabricated by Powder Metallurgy Process,” Journal of the Korean Society for Composite Materials, Vol. 34, No. 5, 2021, pp. 311-316.
  •  
  • 5. Oh, N.R., Lee, S.K., Cho, S.C., Jo, I.G., Hwang, K.C., Kim, D.H., Cho, Y.T., Suh, D.W., and Hong, H.U., “Temperature Dependency of the Tensile Characteristics and Transition of Fracture Behaviors in a Novel Infiltrated TiC-SKD11 Composites,” Korean Journal of Metals and Materials, Vol. 55, No. 3, 2017, pp. 156-164.
  •  
  • 6. Yoon, S.H., Kim, J.H., Kim, B.D., and Lee, C.H., “Tribological Behavior of B4C Reinforced Fe-base Bulk Metallic Glass Composite Coating,” Surface & Coatings Technology, Vol. 205, No. 7, 2010, pp. 1962-1968.
  •  
  • 7. Darabara, M., Papadimitriou, G.D., and Bourithis, L., “Tribological Evaluation of Fe–B–TiB2 Metal Matrix Composites,” Surface & Coatings Technology, Vol. 202, No. 2, 2007, pp. 246-253.
  •  
  • 8. Chandramouli, T.V., Sharnappa, J., Ramesh, M.R., and Mohammad, R.R., “Microstructure, Mechanical Properties, and Tribological Properties of Fe-Based Composite Coatings Reinforced with WC-Co and Cr3C2,” Vol. 34, 2025, pp. 10323-10338.
  •  
  • 9. Xiao, J.K., Wu, Y.Q., Zhang, W., Chen, J., and Zhang, C., “Friction of Metal-matrix Self-lubricating Composites: Relationships among Lubricant Content, Lubricating Film Coverage, and Friction Coefficient,” Friction, Vol. 8, No. 3, 2020, pp. 517-530.
  •  
  • 10. Diego, M., Paolo, R., Antonio, B., Righi, M.C., Alberto, R., and Sergio, V., “Surface Passivation by Graphene in the Lubrication of Iron: A Comparison with Bronze,” Carbon, Vol. 116, 2017, pp. 375-380.
  •  
  • 11. Kim, J.H., Lee, J.H., Park, B.G., Lee, T.G., Yoo, K.M., Chung C.Y., Kwon, H.S., Jung, I.H., Lee, S.B., Lee, S.K., and Cho, S.C., “Mechanisms of Microstructural Evolution in High-volume TiC Reinforced Steel Composites: Insights into Particle Coarsening, Morphology, and Thermochemical Reactions,” Journal of Materials Research and Technology, Vol. 30, 2024, pp. 5286-5299.
  •  
  • 12. Rubin, P., Larker, R., Navara, E., and Antti, M.L., “Graphite Formation and Dissolution in Ductile Irons and Steels Having High Silicon Contents: Solid-State Transformations,” Metallography, Microstructure, and Analysis, Vol. 7, 2018, pp. 587-595.
  •  
  • 13. Jon, S., Garikoitz, A., Urko, D.L.T., and Jacques, L., “Chunky Graphite in Low and High Silicon Spheroidal Graphite Cast Irons–Occurrence, Control and Effect on Mechanical Properties,” Materials, Vol. 13, No. 23, 2020, pp. 5402.
  •  
  • 14. Jabbari Behnam, M.M., Davami, P., and Varahram, N., “Effect of Cooling Rate on Microstructure and Mechanical Properties of Gray Cast Iron,” Materials Science and Engineering A, Vol. 528, 2010, pp. 583-588.
  •  
  • 15. Luo, X., Baxevanakis, K.P., and Silberschmidt, V.V., “Crack Initiation in Compacted Graphite Iron with Random Microstructure: Effect of Volume Fraction and Distribution of Particles,” Materials, Vol. 17, No. 13, 2024, pp. 3346.
  •  
  • 16. Lutz, H., Christiam, G., Jiali, Z., Betto, D.J., Andreas, B.P., and Christoph, B., “The Effect of Silicon Microsegregation on the Mechanical Properties of High Silicon Alloyed Ductile Cast Iron under Monotonous Loading”, Heliyon, Vol. 10, 2024, e23904.
  •  
  • 17. Shanmughasundaram, P., and Subramanian, R., “Wear Behaviour of Eutectic Al-Si Alloy-Graphite Composites Fabricated by Combined Modified Two-Stage Stir Casting and Squeeze Casting Methods,” Advances in Materials Science and Engineering, Vol. 2013, No. 1, 2013, pp. 8.
  •  
  • 18. Polat, S., Atapek, S.H., Tiredi, E., Tashcukur, Z., and Altug, G.S., “Investigation of Dry Sliding Wear Mechanism of GG20 and GG25 Cast Iron Materials Used for Valves,” Proceeding of the 3rd International Conference of Engineering Against Failure, Kos, Greece, June. 2013, pp. 26-28.
  •  
  • 19. Menghui, C., Xiaoyun, D., Yong, L., and Jin, Z., “Self-healing Performance and Wear Resistance of Electro-spark Deposition TiVCrNiSi0.1 Coating on Ti6Al4V alloy at High Temperature,” Surface & Coatings Technology, Vol. 478, No. 29, 2024, pp. 130491.
  •  

This Article

Correspondence to

  • Junghwan Kim
  • E-mail: jhwankim@kims.re.kr