Original Article
  • Investigation of Interfacial Property Changes According to the Use of Veils in Carbon Fiber Reinforced Composites Fabrication

  • Hyoungjin Ji*, Minseo Kim*, Jitea Seo*, Donghyeon Lee**, Dong-Jun Kwon*†

  • * Department of Polymer Science and Engineering, Gyeongsang National University
    ** Department of Materials Science and Convergence Technology, Gyeongsang National University

  • 탄소섬유 강화 복합재료 제조시 Veil 사용에 따른 계면물성 변화 조사

  • 지형진* · 김민서* · 서지태* · 이동현** · 권동준*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Centea, T., Grunenfelder, L.K., and Nutt, S.R., “A review of out-of-autoclave prepregs–Material properties, process phenomena, and manufacturing considerations,” Composites Part A: Applied Science and Manufacturing, Vol. 70, 2015, pp. 132–154.
  •  
  • 2. Yu, J.-W., and Kim, W.-D., “Prediction of Temperature and Degree of Cure of Carbon Fiber Composites Considering Thermal Chemical Reaction,” Composites Research, Vol. 36, No. 5, 2023, pp. 315–320.
  •  
  • 3. Hong, S., Song, M.-H., Song, K., Baik, S.-M., and Shin, S.-J., “Fabrication and evaluation of integrated composite part for aircraft using OoA (Out-of-Autoclave) prepreg,” Composites Research, Vol. 29, No. 5, 2016, pp. 315–320.
  •  
  • 4. Sung, J.-W., Choe, H.-S., Kwon, B.-S., Oh, S.-W., Lee, S.-M., Nam, Y.-W., and Kweon, J.-H., “Mechanical properties for processing parameters of thermoplastic composite using automated fiber placement,” Composites Research, Vol. 32, No. 5, 2019, pp. 229–236.
  •  
  • 5. Evans, D.O., Vaniglia, M.M., and Hopkins, P.C., “Fiber placement process study,” Tomorrow's Materials: Today, Vol. 34, 1989, pp. 1822–1833.
  •  
  • 6. Grimshaw, M.N., “Automated tape laying,” ASM International, 2001, pp. 480-485.
  •  
  • 7. Sela, N., and Ishai, O., “Interlaminar fracture toughness and toughening of laminated composite materials: a review,” Composites, Vol. 20, No. 5, 1989, pp. 423–435.
  •  
  • 8. Beylergil, B., Tanoğlu, M., and Aktaş, E., “Effect of polyamide-6, 6 (PA 66) nonwoven veils on the mechanical performance of carbon fiber/epoxy composites,” Composite Structures, Vol. 194, 2018, pp. 21–35.
  •  
  • 9. Kwon, D.-J., Jang, Y.-J., Choi, H.H., Kim, K., Kim, G.-H., Kong, J., and Nam, S.Y., “Impacts of thermoplastics content on mechanical properties of continuous fiber-reinforced thermoplastic composites,” Composites Part B: Engineering, Vol. 216, 2021, pp. 108859.
  •  
  • 10. Yang, S.B., Lee, D., Lee, Y., and Kwon, D.-J., “Comparison of Resin Impregnation and Mechanical Properties of Composites Based on Fiber Plasma Treatment,” Composites Research, Vol. 36, No. 6, 2023, pp. 388–394.
  •  
  • 11. Kim, J.-H., Shin, P.-S., and Kwon, D.-J., “Evaluation of static and dynamic contact angle methods for their correlation with interfacial properties in composites,” Advances in Industrial and Engineering Chemistry, Vol. 1, No. 1, 2025, pp. 16.
  •  
  • 12. Lee, D., Park, J., Woo, M.J., Lee, J., Park, J.-M., Lim, H.M., Lee, T.K., Yang, S.B., Nam, S.Y., and Kwon, D.-J., “Impact of polymer structure in polyurethane topcoats on anti-icing properties,” Applied Surface Science, Vol. 667, 2024, pp. 160402.
  •  
  • 13. Da Silva, L.F., Rodrigues, T., Figueiredo, M., De Moura, M., and Chousal, J., “Effect of adhesive type and thickness on the lap shear strength,” The Journal of Adhesion, Vol. 82, No. 11, 2006, pp. 1091–1115.
  •  
  • 14. Kwon, D.-J., Park, S.-M., Kwon, I.-J., Park, J.-M., and Jeong, E., “Improvement of interlaminar properties of carbon fiber-reinforced epoxy composites using aluminum trihydroxide,” Carbon Letters, Vol. 29, No. 2, 2019, pp. 183–191.
  •  
  • 15. Tanoglu, M., Robert, S., Heider, D., McKnight, S., Brachos, V., and Gillespie Jr, J., “Effects of thermoplastic preforming binder on the properties of S2-glass fabric reinforced epoxy composites,” International Journal of Adhesion and Adhesives, Vol. 21, No. 3, 2001, pp. 187–195.
  •  
  • 16. Lee, D., Park, J.-M., Lim, H.M., and Kwon, D.-J., “Investigation of Damage to Polyurethane Topcoat Based on De-icing Cycles,” Composites Research, Vol. 37, No. 3, 2024, pp. 204–208.
  •  
  • 17. Owens, D.K., and Wendt, R., “Estimation of the surface free energy of polymers,” Journal of Applied Polymer Science, Vol. 13, No. 8, 1969, pp. 1741–1747.
  •  
  • 18. Whitney, J., and Browning, C., “On short-beam shear tests for composite materials,” Experimental Mechanics, Vol. 25, No. 3, 1985, pp. 294–300.
  •  
  • 19. Lomov, S.V., Verpoest, I., Peeters, T., Roose, D., and Zako, M., “Nesting in textile laminates: geometrical modelling of the laminate,” Composites Science and Technology, Vol. 63, No. 7, 2003, pp. 993–1007.
  •  

This Article

Correspondence to

  • Dong-Jun Kwon

  • Department of Polymer Science and Engineering, Gyeongsang National University

  • E-mail: rorrir@empas.com, djkwon@gnu.ac.kr