Original Article
  • Study on Mold Temperature-Dependent Deformation and Impact Behavior of PPS/GF Composites using Digital Image Correlation

  • Beom-Gon Cho†

  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology

  • 디지털 이미지 상관법을 이용한 PPS/GF 복합재의 금형 온도 의존적 변형 및 충격특성 연구

  • 조범곤†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Choi, M.S., Lee, J.R., Ryu, S.W., and Ku, B.C., “Fabrication and Application of Polyphenylene Sulfide(PPS) Composites: A Short Review,” Composites Research, Vol. 33, No. 3, 2020, pp. 91-100.
  •  
  • 2. Heo, K.Y., Park, S.M., Lee, E.S., Kim, M.S., Sim, J.H., and Bae, J.S., “A Study on Properties of the Glass Fiber Reinforced PPS Composites for Automotive Headlight Source Module,” Composites Research, Vol. 29, No. 5, 2016, pp. 293-298.
  •  
  • 3. Kulhan, T., Kamboj, A., Gupta, N.K., and Somani, N., “Fabrication Methods of Glass Fibre Composites: A Review,” Functional Composites and Structures, Vol. 4, No. 2, 2022, pp. 022001.
  •  
  • 4. Isaincu, A., Micota, M., and Mardavina, L., “On the fracture toughness of PPS and PPA reinforced with Glass Fiber,” Procedia Structure Intrgrity, Vol. 41, 2022, pp. 646–655.
  •  
  • 5. Barbosa, L.C.M., de Souza, S.D.B., Botelho, E.C., Cândido, G.M., and Rezende, M.C., “Fractographic Evaluation of Welded Joints of PPS/Glass Fiber Thermoplastic Composites,” Engineering Failure Analysis, Vol. 102, 2019, pp. 60-68.
  •  
  • 6. Hong, C.Y., Kim, J.A., Kim, G.C., and Ji, W.S., “Effect of Stacking Sequence on Impact Resistance Performance of Hybrid Composites Laminated with Continuous and Discontinuous Fiber-Reinforced Layers,” Functional Composites and Structures, Vol. 3, No. 2, 2021, pp. 02LT01.
  •  
  • 7. Mulla, M.H., Norizan, M.N., Abdullah, C.K., Rawi, N.F.M., Kassim, M.H.M., Abdullah, N., Norrrahim, M.N.F., and Elahi, M.S.M., “Low Velocity Impact Performance of Natural Fibre Reinforced Polymer Composites: A Review,” Functional Composites and Structures, Vol. 5, No. 3, 2023, pp. 035004.
  •  
  • 8. Saleh, M., Tooski, M.Y., Khorshidvand, A.R., and Javadi, M., “Experimental Study of the Effect of Carbon Nanotubes and Nano-silica on the Impact Resistance of FML Sheets Under Low Velocity Impact,” Functional Composites and Structures, Vol. 7, No. 3, 2025, pp. 035001.
  •  
  • 9. Solfiti, E., Solberg, K., Gagani, A., Landi, L., and Berto, F., “Static and Fatigue Behavior of Injection Molded Short-fiber Reinforced PPS Composites: Fiber Content and High Temperature Effects,” Engineering Failure Analysis, Vol. 126, 2021, pp. 105429.
  •  
  • 10. Oshima, S., Higuchi, R., Kato, M., Minakuchi, S., Yokozeki, T., and Aoki, T., “Cooling Rate-dependent Mechanical Properties of Polyphenylene Sulfide (PPS) and Carbon Fiber Reinforced PPS (CF/PPS),” Composites Part A, Vol. 164, 2023, pp. 107250.
  •  
  • 11. Vieille, B., Ernault, E., Delpouve, N., Gonzalez, J.P., Esposito, A., Dargent, E., Le Pluart, L., and Delbreilh, L., “On the Improvement of Thermo-mechanical Behavior of Carbon/polyphenylene Sulfide Laminated Composites Upon Annealing at high Temperature,” Composites Part B., Vol. 216, 2021, pp. 108858.
  •  
  • 12. Jeong, D.Y., Jung, C.G., Lee, J.Y., Kim, S.H., Lee, P.C., Lee, H.W., and Ha, J.U., “Comparison of Polyphenylene Sulfide Composites Having Different Processing Temperatures and Glass Fibers,” Elastomers Composites, Vol. 54, 2019, pp. 308-312.
  •  
  • 13. Hong, S.H., and Cho, B.G., “Effect of Cooling Temperature on Crystalline Behavior of Polyphenylene Sulfide/Glass Fiber Composites,” Polymers, Vol. 15, No. 15, 2023, pp. 3179.
  •  
  • 14. Lee, S.Y., and Ji, W.S., “Digital-image-based Analysis of Fiber-Reinforced Composites: A Review,” Functional Composites and Structures, Vol. 7, No. 2, 2025, pp. 022003.
  •  
  • 15. Batista, N.L., Rezende, M.C., and Botelho, E.C., “Effect of Crystallinity on CF/PPS Performance under Weather Exposure: Moisture, Salt Fog and UV Radiation,” Polymer Degradation Stability, Vol. 153, 2018, pp. 255-261.
  •  
  • 16. Lee, M.P., Kim, Y.C., and Choe, C.R., “Crystallization Behavior of Polyphenyele Sulfide (PPS) and PPS/carbon Fiber Composites,” Polymer Bulletin, Vol. 30, 1993, pp. 469-475.
  •  
  • 17. Liu, P., Dinwiddie, R.B., Keum, J.K., Vasudevan, R.K., Jesse, S., Nguyen, N.A., Lindahl, J.M., and Kunc, V., “Rheology, Crystal Structure, and Nanomechanical Properties in Large-scale Additive Manufacturing of Polyphenylene Sulfide/carbon Fiber Composites,” Composites Science and Technology, Vol. 168, 2018, pp. 263-271.
  •  
  • 18. Shadmehri, F., and Hoa, S.V., “Digital Image Correlation Applications in Composite Automated Manufacturing, Inspection, and Testing,” Applied Science, Vol. 9, 2019, pp. 2719.
  •  
  • 19. Holmes, J., Sommacal, S., Das, R., Stachurski, Z., and Compston, P., “Digital Image and Volume Correlation for Deformation and Damage Characterisation of Fibre-Reinforced Composites: A Review,” Composites Structures, Vol. 315, 2023, pp. 116994.
  •  
  • 20. Tekieli, M., Santis, S.D., Felice, G.D., Kwiecien, A., Roscini, F., “Application of Digital Image Correlation to Composite Reinforcements Testing,” Composites Structures, Vol. 160, 2017, pp. 670-688.
  •  

This Article

Correspondence to

  • Beom-Gon Cho

  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology

  • E-mail: bgcho@kumoh.ac.kr