Original Article
  • Non-Woody Biomass-Derived Materials for Tissue Engineering and Orthopedic Applications

  • Hui-Yun Hwang†

  • School of Electronics and Mechanical Engineering, Gyeongkuk National University

  • 비목질계 바이오매스 유래 소재의 조직공학 및 정형외과적 응용

  • 황희윤†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Faruk, O., Bledzki, A.K., Fink, H., and Sain, M., “Biocomposites reinforced with natural fibers: 2000–2010,” Progress in Polymer Science, Vol. 37, No. 11, 2012, pp. 1552-1596.
  •  
  • 2. Batra, S.K., Other Long Vegetable Fibers: Abaca, Banana, Sisal, Henequen, Flax, Ramie, Hemp, Sunn, and Coir, In Handbook of Fiber Chemistry (3rd ed.), CRC Press, Boca Raton, FL, 2007.
  •  
  • 3. Ramesh, M., Hemp, jute, banana, kenaf, ramie, sisal fibers, In Testing and Characterization of Sustainable Bio-Composites, Woodhead Publishing, Cambridge, UK, 2018.
  •  
  • 4. Eleutério, T., Trota, M.J., Meirelles, M.G., and Vasconcelos, H.C., “A Review of Natural Fibers: Classification, Composition, Extraction, Treatments, and Applications,” Fibers, Vol. 13, No. 9, 2025, 119.
  •  
  • 5. Bourmaud, A., Morvan, C., Bouali, A., Placet, V., Perré, P., and Baley, C., “Relationships between Micro-Fibrillar Angle, Mechanical Properties and Biochemical Composition of Flax Fibers,” Industrial Crops and Products, Vol. 44, 2013, pp. 343-351.
  •  
  • 6. Sorieul, M., Dickson, A., Hill, S., and Pearson, H., “Plant Fibre: Molecular Structure and Biomechanical Properties, of A Complex Living Material, Influencing Its Deconstruction Towards a Biobased Composite,” Materials, Vol. 9, No. 8, 2016, 618.
  •  
  • 7. Vignesh, N.J., Rajesh Jesudoss Hynes, N., ShenbagaVelu, P., and Pravin, R., “A Survey on Characterization of Natural Fibers,” AIP Conference Proceedings, Vol. 2142, 2019, p. 150014.
  •  
  • 8. Stochioiu, C., and Ciolcă, M., “Mechanical Characterization of Flax and Hemp Fibers Cultivated in Romania,” Materials, Vol. 17, No. 19, 2024, 4871.
  •  
  • 9. Sayeed, M.M.A., Sayem, A.S.M., Haider, J., Akter, S., Habib, M.M., Rahman, H., and Shahinur, S., “Assessing Mechanical Properties of Jute, Kenaf, and Pineapple Leaf Fiber-Reinforced Polypropylene Composites: Experiment and Modelling,” Polymers, Vol. 15, No. 4, 2023, 830.
  •  
  • 10. Scholz, M.S., Blanchfield, J.P., Bloom, L.D., Coburn, B.H., Elkington, M., Fuller, J.D., Gilbert, M.E., Muflahi, S.A., Pernice, M.F., Rae, S.I., Trevarthen, J.A., White, S.C., Bond, I.P., and Weaver, P.M., “The Use of Composite Materials in Modern Orthopaedic Medicine and Prosthetic Devices: A Review,” Composites Science and Technology, Vol. 71, No. 16, 2011, pp. 1791-1803.
  •  
  • 11. Madhukiran, J., Rao, S.S., and Madhusudan, S., “Fabrication and Testing of Natural Fiber Reinforced Hybrid Composites Banana/Pineapple,” International Journal of Modern Engineering Research, Vol. 3, No. 4, 2013, pp. 2239-2240.
  •  
  • 12. Ramanjaneyulu, C., Prasad, A.V.S.R., and Reddy, K.H.C., “Experimental Investigation of Mechanical, Thermal, DMA Analysis and Morphological Analysis on Abaca / Hemp / Kenaf,” Matéria (Rio de Janeiro), Vol. 29, No. 1, 2024, e20230234.
  •  
  • 13. Stevulova, N., Cigasova, J., Estokova, A., Terpakova, E., Singovszka, E., and Holub, M., “Properties Characterization of Chemically Modified Hemp Hurds,” Materials, Vol. 7, No. 12, 2014, pp. 8131-8150.
  •  
  • 14. Jawahar, P., Narmatha, M., and Vigneshkumar, M., “Mechanical Characterization of Kenaf Fiber (KF) and Jute Fiber (JF),” Journal on Materials and its Characterization, Vol. 3, No. 4, 2024, pp. 10-19.
  •  
  • 15. Baghaei, B., Skrifvars, M., Rissanen, M., and Ramamoorthy, S.K., “Characterization of Hemp Fiber Reinforced PLA Composites,” Journal of Applied Polymer Science, Vol. 131, No. 15, 2014, 40534.
  •  
  • 16. George, J., and Sabapathi, S.N., “Cellulose Nanocrystals: Synthesis, Functional Properties, and Applications,” Nanotechnology, Science and Applications, Vol. 8, 2015, pp. 45-54.
  •  
  • 17. Aziz, T., Fan, H., Khan, F.U., Haroon, M., and Cheng, L., “A Review on the Modification of Cellulose and Its Applications,” Polymers, Vol. 14, No. 15, 2022, 3206.
  •  
  • 18. Di, J., Li, J., Sun, C., Xu, L., and Li, X., “Advances in Cellulose-Based Hydrogels for Drug Delivery: Preparation, Modification and Challenges,” Gels, Vol. 11, No. 12, 2025, 938.
  •  
  • 19. del Olmo, J. A., Martínez, V. S., de Cestafe, N. M., Alonso, J. M., Olavarrieta, C., de Heredia, M. U. L., Sandra Benito Cid, and González, R. P., “Effectiveness Evaluation of Hyaluronic Acid-Based Commercial Eye Drops to Treat Ophthalmic Dry Eye Disease,” Carbohydrate Polymer Technologies and Applications, Vol. 8, 2024, p. 100577.
  •  
  • 20. Chen, M., Li, Y., Liu, H., Zhang, D., and Shi, Q.S., “High Value Valorization of Lignin as Environmental Benign Antimicrobial,” Materials Today Bio, Vol. 18, 2022, 100520.
  •  
  • 21. Yang, W., Owczarek, J.S., Fortunati, E., Kozanecki, M., Mazzaglia, A., Balestra, G.M., Kenny, J.M., Torre, L., and Puglia, D., “Antioxidant and Antibacterial Lignin Nanoparticles in Polyvinyl Alcohol/Chitosan Films for Active Packaging,” Industrial Crops and Products, Vol. 94, 2016, pp. 800-811.
  •  
  • 22. United States Pharmacopeia, USP chapter <161>, Transfusion and Infusion Assemblies and Similar Medical Devices, USP Convention, Rockville, MD.
  •  
  • 23. Figueiredo, P., Lintinen, K., Kiriazis, A., Hynninen, V., Liu, Z., Bauleth-Ramos, T., Rahikkala, A., Correia, A., Kohout, T., Sarmento, B., Yliperttula, M., Kostiainen, M.A., and Santos, H.A., “In vitro Evaluation of Biodegradable Lignin-based Nanoparticles for Drug Delivery and Enhanced Antiproliferation Effect in Cancer Cells,” Biomaterials, Vol. 121, 2017, pp. 97-108.
  •  
  • 24. Han, F., Wang, J., Ding, L., Hu, Y., Li, W., Yuan, Z., Guo, Q., Zhu, C., Yu, L., Wang, H., and Zhao, Z., “Tissue Engineering Scaffolds,” Frontiers in Bioengineering and Biotechnology, Vol. 8, 2020, 83.
  •  
  • 25. Leal, B.B.J., Wakabayashi, N., Oyama, K., Kamiya, K., Braghirolli, D.I., and Pranke, P., “Vascular Tissue Engineering: Polymers and Methodologies for Small Caliber Vascular Grafts,” Frontiers in Bioengineering and Biotechnology, Vol. 8, 2021, 583217.
  •  
  • 26. International Organization for Standardization, Biological Evaluation of Medical Devices—Part 5: Tests for In Vitro Cytotoxicity (ISO Standard No. 10993-5:2009), ISO, Geneva, Switzerland, 2009.
  •  
  • 27. Namvar, F., Jawaid, M., Tahir, P.M., Mohamad, R., Azizi, S., Khodavandi, A., Rahman, H.S., and Nayeri, M.D., “Potential Use of Plant Fibres and Their Composites for Biomedical Applications,” BioResources, Vol. 9, No. 3, 2014, pp. 5688-5706.
  •  
  • 28. Endes, C., Camarero-Espinosa, S., Mueller, S., Foster, E.J., Petri-Fink, A., Rothen-Rutishauser, B., Weder, C., and Clift, M.J.D., “A Critical Review of The Current Knowledge Regarding The Biological Impact of Nanocellulose,” Journal of Nanobiotechnology, Vol. 14, 2016, 78.
  •  
  • 29. Pereira, M.M., Raposo, N.R.B., Brayner, R., Teixeira, E.M., Oliveira, V., Quintão, C.C.R., Camargo, L.S.A., Mattoso, L.H.C., and Brandão, H.M., “Cytotoxicity and Expression of Genes Involved in The Cellular Stress Response and Apoptosis in Mammalian Fibroblast Exposed to Cotton Cellulose Nanofibers,” Nanotechnology, Vol. 24, No. 7, 2013, 075103.
  •  
  • 30. Basu, A., Hong, J., and Ferraz, N., “Hemocompatibility of Ca2+-crosslinked Nanocellulose Hydrogels: Toward Efficient Management of Hemostasis,” Macromolecular Bioscience, Vol. 17, No. 11, 2017, 1700236.
  •  
  • 31. Pei, B., Wang, W., Fan, Y., Wang, X., Watari, F., and Li, X., “Fiber-Reinforced Scaffolds in Soft Tissue Engineering,” Regenerative Biomaterials, Vol. 4, No. 5, 2017, pp. 257-268.
  •  
  • 32. Khouaja, A., Koubaa, A., and Daly, H.B.., “Mechanical and morphological properties of cellulose biocomposites,” Chemosphere, Vol. 379, 2025, 144415.
  •  
  • 33. Bhatnagar, P., Law, J.X., and Ng, S.F., “Evaluation of a Kenaf Nanocrystalline Cellulose-based Hydrogel Containing Platelet Lysate for Full-thickness Wound Healing,” Recent Advances in Drug Delivery and Formulation, Vol. 19, No. 1, 2025, pp. 72-85.
  •  
  • 34. Bagheri, Z.S., Tavakkoli Avval, P., Bougherara, H., Aziz, M.S.R., Schemitsch, E.H., and Zdero, R., “Biomechanical Analysis of a New Carbon Fiber/Flax/Epoxy Bone Fracture Plate Shows Less Stress Shielding Compared to a Standard Clinical Metal Plate,” Journal of Biomechanical Engineering, Vol. 136, No. 9, 2014, 091002.
  •  
  • 35. Al-Tamimi, A.A., Quental, C., Folgado, J., Peach, C., and Bartolo, P., “Stress analysis in a bone fracture fixed with topology-optimised plates,” Biomechanics and Modeling in Mechanobiology, Vol. 19, No. 2, 2019, pp. 693-699.
  •  
  • 36. Senthil Maharaj, P.S.R., and Vasanthanathan, A., “An Insight into The Mechanical and Tribological Behavior of Carbon-Flax Reinforced Bioepoxy Hybrid Composite Bone Plates for Orthopedic Applications,” Polymers and Polymer Composites, Vol. 31, 2023, pp. 1-12.
  •  
  • 37. Fadhil, H.X., Hamad, Q.A., Oleiwi, J.K., and Ibrahim, N.F., “Investigations of Flexural and Impact Properties of Bio-Epoxy-Based Composites for Bone Plate Application,” Engineering and Technology Journal, Vol. 43, No. 12, 2025, pp. 1084-1095.
  •  
  • 38. J Khan, M.U.A., Razak, S.I.A., Ansari, M.N.M., Zulkifli, R.M., Ahmad Zawawi, N., Arshad, M., “Development of Biodegradable Bio-Based Composite for Bone Tissue Engineering: Synthesis, Characterization and In Vitro Biocompatible Evaluation,” Polymers, Vol. 13, 2021, 3611.
  •  
  • 39. Liu, X., Wang, B., Ma, J., and Hu, H., “3D-Printed Heterogeneous Biomimetic Scaffold Utilizing TEMPO-Oxidized and Mineralized Bacterial Cellulose Nanofibers for Osteochondral Regeneration,” Carbohydrate Polymers, Vol. 370, 2025, 124366.
  •  
  • 40. Akter, M., Uddin, M.H., and Tania, I.S., “Biocomposites based on natural fibers and polymers: A review on properties and potential applications,” Journal of Reinforced Plastics and Composites, Vol. 41, No. 17-18, 2022, pp. 705-742.
  •  
  • 41. Sultan, S, and Mathew, A.P., Three-dimensional Printing of Nanocellulose-Based Hydrogels, In: Jose, J., Thomas, S., Thakur, V.K. (eds) Nano Hydrogels. Gels Horizons: From Science to Smart Materials. Springer, Singapore, 2021.
  •  
  • 42. Sharma, C., Raza, M.A., Purohit, S.D., Pathak, P., Gautam, S, Corridon, P.R., and Han S.S., “Cellulose-based 3D Printing Bio-inks for Biomedical Applications: A Review,” International Journal of Biological Molecules, Vol. 305, No. 2, 2025, 141174.
  •  
  • 43. Sreedharan, M., Vijayamma, R., iyaskina, E., Revin, V.V., Ullah, M.W., Shi, Z., Yang, G., Grohens, Y., Kalarikkal, N., Khan, K.A., and Thomas, S., “Nanocellulose-Based Scaffolds for Skin and Bone Tissue Engineering: A 10-Year Overview,” Biomacromolecules, Vol. 25, No. 4, 2024, pp. 2136-2155.
  •  
  • 44. Liang, R., Yang, X., Yew, P. Y. M., Sugiarto, S., Zhu, Q., Zhao, J., Loh, X. J., Zheng, L., and Kai, D., “PLA-Lignin Nanofibers as Antioxidant Biomaterials for Cartilage Regeneration and Osteoarthritis Treatment,” Journal of Nanobiotechnology, Vol. 20, 2022, 327.
  •  
  • 45. Hwazen, S.F., Qahtan, A.H., and Jawad, K.O., “Fabrication and biological evaluation of bio-epoxy hybrid composites reinforced with flax, glass, carbon, and polyethylene fibers for bone plate applications,” Annales De Chimie. Science Des Materiaux, Vol. 49, No. 2, 2025, pp. 187-193.
  •  
  • 46. Kennedy, S.M., Aruachalam, V., and Kannan, A., “A Novel Carbon-Flax Bioepoxy Hybrid Composite Bone Plate with Enhanced Bio-Mechanical Performance,” Materials Science and Engineering Technology, Vol. 55, No. 4, 2024, pp. 508-517.
  •  
  • 47. Kumar, S.S., Aravindh, M., Manoj, V.K., Madhumithra, C., Kaviya, P., and Yaswanth, S., “Fracture toughness of bio-fiber reinforced polymer composites- a review,” Materials Today: Proceedings, In Press, 2023.
  •  
  • 48. Kumar, S., Zindani, D., and Bhowmik, S., “Investigation of Mechanical and Viscoelastic Properties of Flax- and Ramie-Reinforced Green Composites for Orthopedic Implants,” Journal of Materials Engineering and Performance, Vol. 29, 2020, pp. 3161-3171.
  •  
  • 49. Gashawtena, E., Sirahbizu, B., and Kidane, A., “Review on Alternate Materials for Producing Low Cost Lower Limb Prosthetic Socket,” Journal of Material Sciences & Engineering, Vol. 10, No. 6, 2021, pp. 1-6.
  •  
  • 50. Fadhil, H.S., Oleiwi, J.K., and Hamad, Q.A., “Investigation of Tensile, and Morphological Characteristic of Laminated Bio-Composite for Bone Plate Fixation Applications,” Journal of Composite and Advanced Materials, Vol. 35, No. 2, 2025, pp. 295-302.
  •  
  • 51. Kuscu, S., Baysan, F.D., Korkmaz, N., Kuscu, A.I., and Karadag, A., “Enhancing Mechanical Properties Of Glass-Ionomer Cement with Hemp Fiber: A Sustainable Approach for Dental Restorations,” BMC Oral Health, Vol. 25, 2025, 369.
  •  
  • 52. Baysan, F.D., Kuscu, S., Korkmaz, N., and Celebi, N., “Evaluation of the Effects of Hemp Fiber Addition on Fracture Strength, Acrylic Tooth Bonding and Water Absorption of Polymethyl Methacrylate,” Selcuk Dental Journal, Vol. 12, No. 1, 2025, pp. 14-19.
  •  
  • 53. Kuscu, S., Baysan, F.D., and Korkmaz, N., “Effect of Addition of Hemp Fiber and Lignin-pectin-free Hemp Fiber to Poly(methyl methacrylate) on Surface Roughness Property,” BMC Oral Health, Vol. 25, 2025, 847.
  •  
  • 54. Sheng, S.B., Alawi, R., Johari, Y., Muttlib, N.A.A., Hussin, M.H., Mohamad, D/, and Karobari, M.I., “Effects of Fiber Loading on Mechanical Properties of Kenaf Nanocellulose Reinforced Nanohybrid Dental Composite Made of Rice Husk Silica,” Journal of Functional Biomaterials, Vol. 14, No. 4, 184.
  •  
  • 55. Abbas, H., Characterization of Fiber Reinforced Nanohybrid Dental Composites from Agricultural Biowaste Using Kenaf Fiber. Masters thesis, Universiti Sains Malaysia, 2022.
  •  

This Article

Correspondence to

  • Hui-Yun Hwang

  • School of Electronics and Mechanical Engineering, Gyeongkuk National University

  • E-mail: hyhwang@gknu.ac.kr