Original Article
  • 막­굽힘 분리 모델을 적용한 열가소성 복합재의 유한요소법 기반 편향 인장 주름 해석

  • H. Na*, **, S. Kim*, **, ***, D.H. Kim***, S.W. Kim*, **, ***, ****†

  • * Department of Aerospace and Mechanical Engineering, Korea Aerospace University
    ** Department of Smart Air Mobility, Korea Aerospace University
    *** Research Institute for Aerospace Engineering and Technology, Korea Aerospace University
    **** Department of Aeronautical and Astronautical Engineering, Korea Aerospace University

  • Finite Element Analysis of Wrinkling in a Bias-Extension Test of CFRTP using Membrane-Bending Decoupled Model

  • 나희성*, ** · 김솔미*, **, *** · 김동협*** · 김상우*, **, ***, ****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Friedrich, K., and Almajid, A., “Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications,” Applied Composite Materials, Vol. 20, 2013, pp. 107-128.
  •  
  • 2. Kim, S., Kim, D.H., Kim, S.W., and Lee, S.Y., “Prediction of Process-Induced Deformation in CFRTP Thermoforming using Finite Element Analysis and Parametric Study of Key Process Parameters,” Composites Research, Vol. 38, No. 4, 2025, pp. 468-478.
  •  
  • 3. Boisse, P., Hamila, N., Guzman-Maldonado, E., Madeo, A., Hivet, G., and Dell'Isola, F., “The Bias-extension Test for the Analysis of In-plane Shear Properties of Textile Composite Reinforcements and Prepregs: A Review,” International Journal of Material Forming, Vol. 10, 2017, pp. 475-492.
  •  
  • 4. Kim, S., Kim, D.H., Kim, S.W., and Lee, S.Y., “Investigation of Process-induced Deformation in Thermoplastic Composites Through Sequential Thermoforming Simulation Considering Crystallization Kinetics,” Finite Elements in Analysis and Design, Vol. 249, 2025, 104389.
  •  
  • 5. Prodromou, A.G., and Chen, J., “On the Relationship between Shear Angle and Wrinkling of Textile Composite Preforms,” Composites Part A: Applied Science and Manufacturing, Vol. 28, No. 5, 1997, pp. 491-503.
  •  
  • 6. Zhu, B., Yu, T.X., and Tao, X.M., “An Experimental Study of In-plane Large Shear Deformation of Woven Fabric Composite,” Composites Science and Technology, Vol. 67, No. 2, 2007, pp. 252-261.
  •  
  • 7. Long, A.C., Rudd, C.D., Blagdon, M., and Smith, P., “Characterizing the Processing and Performance of Aligned Reinforcements during Preform Manufacture,” Composites Part A: Applied Science and Manufacturing, Vol. 27, No. 4, 1996, pp. 247-253.
  •  
  • 8. Mohammed, U., Lekakou, C., Dong, L., and Bader, M.G., “Shear Deformation and Micromechanics of Woven Fabrics,” Composites Part A: Applied Science and Manufacturing, Vol. 31, No. 4, 2000, pp. 299–308.
  •  
  • 9. Nolte, A.J., Chung, J.Y., Davis, C.S., and Stafford, C.M., “Wrinkling-to-delamination Transition in Thin Polymer Films on Compliant Substrates,” Soft Matter, Vol. 13, No. 43, 2017, pp. 7930-7937.
  •  
  • 10. Naderi, M., Ji, M., Liyanage, S., Palliyaguru, U., Soghrati, S., Iyyer, N., Seneviratne, W., and Phan, N., “Experimental and Numerical Analysis of Wrinkles Influence on Damage Mechanisms and Strength of L-Shape Cross-ply Composite Beams,” Composites Science and Technology, Vol. 223, 2022, 109420.
  •  
  • 11. Harrison, P., Clifford, M.J., and Long, A.C., “Shear Characterisation of Viscous Woven Textile Composites: A Comparison Between Picture Frame and Bias Extension Experiments,” Composites Science and Technology, Vol. 64, No. 10-11, 2004, pp. 1453-1465.
  •  
  • 12. Lee, W.O., Um, M.K., Byun, J.H., and Cao, J., “Characterization of In-plane Shear Behaviors of Woven Fabrics by Bias-extension and Trellis-frame Tests,” Composites Research, Vol. 23, No. 5, 2010, pp. 8-14.
  •  
  • 13. Hamila, N., and Boisse, P., “Simulations of Textile Composite Reinforcement Draping Using a New Semi-discrete Three Node Finite Element,” Composites Part B: Engineering, Vol. 39, No. 6, 2008, pp. 999-1010.
  •  
  • 14. Liang, B., Hamila, N., Peillon, M., and Boisse, P., “Analysis of Thermoplastic Prepreg Bending Stiffness during Manufacturing and of Its Influence on Wrinkling Simulations,” Composites Part A: Applied Science and Manufacturing, Vol. 67, 2014, pp. 111-122.
  •  
  • 15. Döbrich, O., Gereke, T., Diestel, O., Krzywinski, S., and Cherif, C., “Decoupling the Bending Behavior and the Membrane Properties of Finite Shell Elements for a Correct Description of the Mechanical Behavior of Textiles with a Laminate Formulation,” Journal of Industrial Textiles, Vol. 44, No. 1, 2014, pp. 70-84.
  •  
  • 16. Jiao, Z., Wang, Y., Li, H., Du, L., Mu, Y., Zheng, J., and Li, Y., “Wrinkling Prediction and Controlling for the Hot Stamping of Plain Weave CF/PEEK Prepreg in the Molten State,” Composite Structures, Vol. 376, 2025, 119817.
  •  
  • 17. Potluri, P., Ciurezu, D.P., and Ramgulam, R.B., “Measurement of Meso-scale Shear Deformations for Modelling Textile Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 37, No. 2, 2006, pp. 303-314.
  •  
  • 18. Lee, J.M., Kim, B.M., Min, B.J., Park, J.H., and Ko, D.C., “Formability of CFRTP Prepreg Considering Heat Transfer,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 2, 2017, pp. 161-168.
  •  
  • 19. Harrison, P., Taylor, E., and Alsayednoor, J., “Improving the Accuracy of the Uniaxial Bias Extension Test on Engineering Fabrics Using a Simple Wrinkle Mitigation Technique,” Composites Part A: Applied Science and Manufacturing, Vol. 108, 2018, pp. 53-61.
  •  

This Article

Correspondence to

  • S.W. Kim

  • * Department of Aerospace and Mechanical Engineering, Korea Aerospace University
    ** Department of Smart Air Mobility, Korea Aerospace University
    *** Research Institute for Aerospace Engineering and Technology, Korea Aerospace University
    **** Department of Aeronautical and Astronautical Engineering, Korea Aerospace University

  • E-mail: swkim@kau.ac.kr