Original Article
  • Bird Strike and Linear Buckling Analysis of a Multi-Spar Composite Flap

  • Jinho Shin*, **, Gyeong-Han Lee*, ****, Solmi Kim*, **, ****, Sang-Woo Kim*, **, ***† , Myoung Kwan Shin****, Kyubeom Kim****

  • * Department of Aerospace and Mechanical Engineering, Korea Aerospace University
    ** Department of Smart Air Mobility, Korea Aerospace University
    *** Department of Aeronautical and Astronautical Engineering, Korea Aerospace University
    **** Korea Aerospace Industries, LTD.

  • 다중 스파 복합재 플랩의 조류 충돌 및 선형 좌굴 해석

  • 신진호*, ** · 이경한*, **** · 김솔미*, **, **** · 김상우*, **, ***† · 신명관**** · 김규범****

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Dolbeer, R.A., Begier, M.J., Miller, P.R., Weller, J.R., Major, W., and Anderson, A.L., Wildlife Strikes to Civil Aircraft in the United States, 1990–2024, Federal Aviation Administration, Serial Report No. 31, 2025.
  •  
  • 2. Federal Aviation Administration, Airworthiness Standards: Transport Category Airplanes, Federal Aviation Administration, 1964.
  •  
  • 3. Kim, D.H., Kim, S.W., Kim, H.G., Kim, S., and Shin, B.K., “Study on Verification Methodology of Airworthiness Requirements for Bird Strike on Civilian Helicopter Based on Numerical Analysis,” Journal of Aerospace System Engineering, Vol. 13, No. 6, 2019, pp. 70-79.
  •  
  • 4. Kong, C., Lee, S.H., Park, H., and Yoon, J.H., “Impact Structural Behavior by Bird Strike on Engine Inlet Nacelle,” Journal of the Korean Society of Propulsion Engineers, Vol. 11, No. 3, 2007, pp. 58-64.
  •  
  • 5. Zhang, X., Chen, Z., and Liu, Y., The Material Point Method: A Continuum-based Particle Method for Extreme Loading Cases, Academic Press, 2017.
  •  
  • 6. Boyacı, E., and Altın, M., “Experimental and Numerical Approach on Bird Strike: A Review,” International Journal of Automotive Science and Technology, Vol. 7, No. 2, 2023, pp. 95-103.
  •  
  • 7. El-Sayed, A., and Ahmed, F., Bird Strike in Aviation: Statistics, Analysis and Management, John Wiley & Sons, 2019.
  •  
  • 8. Korea Aerospace Industries, Ltd., Bird Strike Analysis Requirements for Slat & Flap Technology Development Under the Clean Wing Module Development Program for a Single-aisle Aircraft (Part 25 Class), Requirement No. 210-G-GL-0173, Rev. A, 2024.
  •  
  • 9. Hashin, Z., “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, 1980, pp. 329-334.
  •  
  • 10. Hallquist, J.O., LS-DYNA Theory Manual, Livermore Software Technology Corporation, 2006.
  •  
  • 11. Huertas-Ortecho, C.A., Robust Bird-strike Modeling Using LS-DYNA, Master’s Thesis, University of Puerto Rico, 2006.
  •  
  • 12. Meguid, S.A., Mao, R.H., and Ng, T.Y., “FE Analysis of Geometry Effects of an Artificial Bird Striking an Aeroengine Fan Blade,” International Journal of Impact Engineering, Vol. 35, No. 6, 2008, pp. 487-498.
  •  
  • 13. Liu, J., Li, Y., and Gao, X., “Bird Strike on a Flat Plate: Experiments and Numerical Simulations,” International Journal of Impact Engineering, Vol. 70, 2014, pp. 21-37.
  •  
  • 14. Hedayati, R., and Ziaei-Rad, S., “A New Bird Model and the Effect of Bird Geometry in Impacts from Various Orientations,” Aerospace Science and Technology, Vol. 28, No. 1, 2013, pp. 9-20.
  •  
  • 15. Budiansky, B., and Hutchinson, J.W., “A Survey of Some Buckling Problems,” AIAA Journal, Vol. 4, No. 9, 1966, pp. 1505-1510.
  •  
  • 16. Hutchinson, J.W., “Axial Buckling of Pressurized Imperfect Cylindrical Shells,” AIAA Journal, Vol. 3, No. 8, 1965, pp. 1461-1466.
  •  
  • 17. Hutchinson, J.W., “Imperfection Sensitivity of Externally Pressurized Spherical Shells,” Journal of Applied Mechanics, Vol. 34, No. 1, 1967, pp. 49-55.
  •  
  • 18. Bathe, K.J., and Wilson, E.L., “Solution Methods for Eigenvalue Problems in Structural Mechanics,” International Journal for Numerical Methods in Engineering, Vol. 6, No. 2, 1973, pp. 213-226.
  •  
  • 19. Cook, R.D., Avrashi, J., and Lin, C.H., “Buckling Analysis: Alternative Formulations, Error Estimation, and Adaptive Meshing,” Finite Elements in Analysis and Design, Vol. 11, No. 1, 1992, pp. 55-65.
  •  
  • 20. Guida, M., Marulo, F., Meo, M., Grimaldi, A., and Olivares, G., “SPH–Lagrangian Study of Bird Impact on Leading Edge Wing,” Composite Structures, Vol. 94, No. 3, 2011, pp. 1060-1071.
  •  
  • 21. Kwon, S.L., Kim, S.I., Kim, K.B., and Yun, G.J., “Birdstrike Analysis of the Flap Driving Parts Considering Effects of Bird Geometry and SPH (Smoothed Particle Hydrodynamics) Parameters,” Journal of the Korean Society for Aeronautical & Space Sciences, Vol. 51, No. 6, 2023, pp. 383-390.
  •  
  • 22. Tan, J.Q., Zhan, M., Liu, S., Huang, T., Guo, J., and Yang, H., “A Modified Johnson-Cook Model for Tensile Flow Behaviors of 7050-T7451 Aluminum Alloy at High Strain Rates,” Materials Science and Engineering: A, Vol. 631, 2015, pp. 214-219.
  •  
  • 23. Wang, C.J., Liu, C., Zhang, M.X., Jiang, L., Liu, Y., Liu, Z.B., and Liang, J.X., “Effect of Yttrium on the Microstructure and Mechanical Properties of PH13-8Mo Stainless Steels Produced by Selective Laser Melting,” Materials, Vol. 15, No. 15, 2022, 5441.
  •  
  • 24. Shin, J., Lee, G.H., Kim, S.W., Kim, M., and Kim, K.B., “Bird Strike Safety Assessment of a Composite Aircraft Flap Using Finite Element Analysis,” Journal of Aerospace System Engineering, Vol. 19, No. 5, 2025, pp. 81-90.
  •  
  • 25. Rabiee, A., and Ghasemnejad, H., “Finite Element Modelling Approach for Progressive Crushing of Composite Tubular Absorbers in LS-DYNA: Review and Findings,” Journal of Composites Science, Vol. 6, No. 1, 2022, 11.
  •  

This Article

Correspondence to

  • Myoung Kwan Shin

  • * Department of Aerospace and Mechanical Engineering, Korea Aerospace University
    ** Department of Smart Air Mobility, Korea Aerospace University
    *** Department of Aeronautical and Astronautical Engineering, Korea Aerospace University

  • E-mail: swkim@kau.ac.kr