Original Article
  • Steel Surface Pretreatments for High-Strength GFRP–Steel Bonding: Linking Topography, Wettability, and Failure Mode

  • Jung-soo Kim*# , Hyeon-yong Lee*, **# , Jungwan Lee*, Moon-kwang Um*, Jinsu Kim*†

  • * Composites & Convergence Materials Research Division, Korea Institute of Materials Science (KIMS), Changwon 51508, Korea
    ** School of Chemical Engineering, Pusan National University, Busan 46241, Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Li, Q., Du, B., Liu, Y., Jian, Q., Feng, T., Zhang, X., Nie, S., and Chen, L., “On structural behavior of lightweight steel-reinforced polymer/composite hybrid structures: A review of analytical, experimental, and numerical methods,” Mechanics of Advanced Materials and Structures, Vol. 33, 2025, 2479207.
  •  
  • 2. Rubino, F., Nisticò, A., Tucci, F., and Carlone, P., “Marine application of fiber reinforced composites: a review,” Journal of Marine Science and Engineering, Vol. 8, No. 1, 2020, pp. 26.
  •  
  • 3. Amancio‐Filho, S.T., and Dos Santos, J.F., “Joining of polymers and polymer–metal hybrid structures: recent developments and trends,” Polymer Engineering and Science, Vol. 49, No. 8, 2009, pp. 1461-1476.
  •  
  • 4. eevi, G., Nayak, S.K., and Abdul Kader, M., “Review on adhesive joints and their application in hybrid composite structures,” Journal of Adhesion Science and Technology, Vol. 33, No. 14, 2019, pp. 1497-1520.
  •  
  • 5. Banea, M.D., and da Silva, L.F.M., “Adhesively bonded joints in composite materials: an overview,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 223, No. 1, 2009, pp. 1-18.
  •  
  • 6. Anyfantis, K.N., and Tsouvalis, N.G., “Analysis of an adhesively bonded single lap joint subjected to eccentric loading,” International ournal of Adhesion and Adhesives, Vol. 41, 2013, pp. 41-49.
  •  
  • 7. Da Silva, L.F., Öchsner, A., and Adams, R.D., eds., Handbook of Adhesion Technology. Springer Science and Business Media, 2011.
  •  
  • 8. Her, S.C., and Chan, C.F., “Interfacial stress analysis of adhesively bonded lap joint,” Materials, Vol. 12, No. 15, 2019, 2403.
  •  
  • 9. Carrère, N., Doitrand, A., Martin, E., and Leguillon, D., “Theoretical study based on 2D assumptions of the influence of small pores on crack initiation in adhesively bonded joints,” International Journal of Adhesion and Adhesives, Vol. 111, 2021, 102979.
  •  
  • 10. Yu, T., Fernando, D., Teng, J.G., and Zhao, X.L., “Experimental study on CFRP-to-steel bonded interfaces,” Composites Part B: Engineering, Vol. 43, No. 5, 2012, pp. 2279-2289.
  •  
  • 11. Fernando, D., Teng, J.G., Yu, T., and Zhao, X.L., “Preparation and characterization of steel surfaces for adhesive bonding,” Journal of Composites for Construction, Vol. 17, No. 6, 2013, 04013012.
  •  
  • 12. Heshmati, M., Haghani, R., and Al-Emrani, M., “Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art,” Composites Part B: Engineering, Vol. 81, 2015, pp. 259-275.
  •  
  • 13. Agarwal, A., Foster, S.J., Hamed, E., and Ng, T.S., “Influence of freeze–thaw cycling on the bond strength of steel–FRP lap joints,” Composites Part B: Engineering, Vol. 60, 2014, pp. 178-185.
  •  
  • 14. Heshmati, M., Haghani, R., and Al-Emrani, M., “Durability of CFRP/steel joints under cyclic wet-dry and freeze-thaw conditions,” Composites Part B: Engineering, Vol. 126, 2017, pp. 211-226.
  •  
  • 15. Ren, X., Jiang, L., He, J., Yang, Y., Sun, Y., Liu, Q., and Chen, S., “Durability of CFRP–steel double–lap joints under cyclic freeze–thaw/wet–dry conditions,” Polymers, Vol. 14, No. 17, 2022, 3445.
  •  
  • 16. Wang, T., Tong, L., Zhu, X., Wang, F., and Pandey, M., “Study on the durability of CFRP-to-steel joints under neutral salt spray exposure,” Journal of Constructional Steel Research, Vol. 223, 2024, 109062.
  •  
  • 17. Mohabeddine, A., Malik, G., Correia, J., De Jesus, A., Fantuzzi, N., and Castro, J.M., “High performance and cost-effective hybrid steel/CFRP joints using bi-adhesive technique for the repair of metallic infrastructures,” Composite Structures, Vol. 321, 2023, 117284.
  •  
  • 18. Saeedifar, M., Saleh, M.N., De Freitas, S.T., and Zarouchas, D., “Damage characterization of adhesively-bonded Bi-material joints using acoustic emission,” Composites Part B: Engineering, Vol. 176, 2019, 107356.
  •  
  • 19. Kupski, J., De Freitas, S.T., Zarouchas, D., Camanho, P.P., and Benedictus, R., “Composite layup effect on the failure mechanism of single lap bonded joints,” Composite Structures, Vol. 217, 2019, pp. 14-26.
  •  
  • 20. Sadeghi, A., Mahshid, R., Heidari-Rarani, M., and Lessard, L., “Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints,” International Journal of Adhesion and Adhesives, Vol. 118, 2022, 103232.
  •  
  • 21. Russian, O., Khan, S., Belarbi, A., and Dawood, M., “Effect of surface preparation technique on bond behavior of CFRP-steel double-lap joints: Experimental and numerical studies,” Composite Structures, Vol. 255, 2021, 113048.
  •  
  • 22. Ou, J., Shao, Y., Huang, C., and Bi, X., “Bond behavior of CFRP sheets-to-steel shear joints with different steel surface treatments,” Composite Structures, Vol. 322, 2023, 117376.
  •  
  • 23. Williams, T.S., Yu, H., Yeh, P.C., Yang, J.M., and Hicks, R.F., “Atmospheric pressure plasma effects on the adhesive bonding properties of stainless steel and epoxy composites,” Journal of Composite Materials, Vol. 48, No. 2, 2014, pp. 219-233.
  •  
  • 24. Takesue, S., and Morita, T., “Effects of Surface Treatment and Morphology on Static and Fatigue Strengths of Adhesively Bonded Steel Plate,” International Journal of Automation Technology, Vol. 18, No. 6, 2024, pp. 803-811.
  •  
  • 25. Ilhan, E., and Cavdar, K., “Atmospheric Pressure Plasma Surface Treatment for Structural Adhesive Bonding in Automotive Body Manufacturing: A Parametric Study,” Applied Sciences, Vol. 15, No. 24, 2025, 12906.
  •  
  • 26. Kanbir, Ö., Ayas, K., and Çavdar, K., “Effect of atmospheric pressure plasma treatment on the wettability and aging behavior of metal surfaces,” Materials Testing, Vol. 67, No. 5, 2025, pp. 875-883.
  •  
  • 27. Du, B., Zhou, X., Li, Q., Liu, J., Liu, Y., Zeng, X., Cheng, X., and Hu, H., “Surface treat method to improve the adhesion between stainless steel and resin: A review,” ACS Omega, Vol. 8, No. 43, 2023, pp. 39984-40004.
  •  
  • 28. Bechikh, A., Klinkova, O., Maalej, Y., Tawfiq, I., and Nasri, R., “Sandblasting parameter variation effect on galvanized steel surface chemical composition, roughness and free energy,” International Journal of Adhesion and Adhesives, Vol. 102, 2020, 102653.
  •  
  • 29. Rudawska, A., Miturska-Barańska, I., Doluk, E., and Olewnik-Kruszkowska, E., “Assessment of surface treatment degree of steel sheets in the bonding process,” Materials, Vol. 15, No. 15, 2022, 5158.
  •  
  • 30. Sun, C., Min, J., Lin, J., and Wan, H., “Effect of atmospheric pressure plasma treatment on adhesive bonding of carbon fiber reinforced polymer,” Polymers, Vol. 11, No. 1, 2019, 139.
  •  
  • 31. Wen, L., Xu, X., and Qin, L., “Effect of low-temperature plasma surface treatment on bonding properties of single-lap joint of thermosetting composites,” Polymers, Vol. 15, No. 7, 2023, 1631.
  •  
  • 32. Rhee, K.Y., Choi, N.S., and Park, S.J., “Effect of plasma treatment of aluminum on the bonding characteristics of aluminum–CFRP composite joints,” Journal of Adhesion Science and Technology, Vol. 16, No. 11, 2002, pp. 1487-1500.
  •  
  • 33. Dartevelle, C., McAlpine, E., Thompson, G.E., and Alexander, M.R., “Low pressure plasma treatment for improving the strength and durability of adhesively bonded aluminium joints,” Surface and Coatings Technology, Vol. 173, No. 2-3, 2003, pp. 249-258.
  •  
  • 34. Guo, J., Zhan, L., Ma, B., Zhang, D., Fan, Y., Yao, S., and Feng, J., “A review on failure mechanism and mechanical performance improvement of FRP-metal adhesive joints under different temperature-humidity,” Thin-Walled Structures, Vol. 188, 2023, 110788.
  •  

This Article

Correspondence to

  • Jinsu Kim

  • * Composites & Convergence Materials Research Division, Korea Institute of Materials Science (KIMS), Changwon 51508, Korea

  • E-mail: jinsu@kims.re.kr