Original Article
  • Thickness Optimization for Spar Cap of Composite Tidal Current Turbine Blade using SQP Method
  • Myung-Chan Cha*, Sang-Woo Kim*, Min-Soo Jeong*, In Lee**†, Seung-Jae Yoo***, Cheon-Jin Park***
  • *한국과학기술원 기계항공시스템공학부 항공우주공학전공 대학원 **† 한국과학기술원 기계항공시스템공학부 항공우주공학전공, Corresponding author (E-mail: inlee@kaist.ac.kr) *** 현대중공업 주식회사
  • SQP법을 사용한 복합재 조류력 발전용 블레이드의 스파 캡에 대한 두께 최적화
  • 차명찬* , 김상우* , 정민수* , 이 인**† , 유승재*** , 박천진***
Abstract
ABSTRACT: In this study, the thickness optimization for uni-directional (UD) glass fiber reinforced polymer (GFRP) laminates of the spar cap of composite tidal blades was performed under the tip deflection constrains. The spar cap was composed of GFRP composites and carbon fiber reinforced polymer (CFRP) composites. The stress distributions in the blade as well as its material costs for the optimized results were additionally investigated. The optimized thickness was obtained by interacting a sequential quadratic programming (SQP) algorithm and an ABAQUS software to calculate an objective function. It was confirmed that the thickness of UD GFRP increased with a decrease of the restrained tip deflection when a thickness of UD CFRP laminates was constrained to 9 mm. The weight of the optimized spar-cap increased up to 96.2% while the maximum longitudinal tensile stress decreased up to 24.6%. The thickness of UD GFRP laminates increased with a decrease of the thickness of UD CFRP laminates when the tip deflection was constrained to 126.83 mm. The weight increased up to 40.1%, but the material cost decreased up to 16.97%. Finally, the relationships among the weight, internal tensile stress, and material costs were presented based on the optimized thicknesses of the spar cap.

초 록: 본 연구에서는 유리강화섬유폴리머(GFRP)와 탄소강화섬유폴리머(CFRP)로 적층된 조류력 블레이드의 스 파 캡(Spar cap)을 대상으로 끝단 처짐의 제한에 따른 단방향(UD) GFRP의 적층 두께를 최적화 하였다. 또한 도출 된 적층 두께에 따른 블레이드 내부의 응력의 변화와 블레이드의 재료비용을 확인하였다. 비선형 최적화에 뛰어 난 순차 이차방정식 프로그래밍(SQP) 알고리즘을 사용하였고, 목적함수를 계산하기 위하여 상용 유한요소해석 프 로그램인 Abaqus/Standard와 연계하였다. UD CFRP의 적층 두께가 9 mm로 제한된 경우, 끝단 처짐이 감소함에 따 라 UD GFRP의 적층 두께가 증가하였다. 즉, 최적화된 스파 캡의 무게는 최대 96.2% 증가였으며 최대 인장응력은 최대 24.6% 감소하였다. 끝단 처짐이 126.83 mm로 제한된 경우, UD CFRP의 적층 두께가 줄어듦에 따라 UD GFRP 의 적층 두께가 증가하였다. 이로 인하여 무게는 최대 40.1% 증가하였지만 재료비용은 최대 16.97% 감소하였다. 본 연구에서 제시한 블레이드 스파 캡의 최적화된 두께를 바탕으로 조류력 블레이드의 무게, 내부의 최대 응력과 재료비용의 상관관계를 제시하였다.

Keywords: tidal current power, composite blades, Sequential Quadratic Programming, weight optimization, finite element analysis

Keywords: 조류력 발전, 복합재 블레이드, 순차 이차방정식 프로그래밍, 무게 최적화, 유한 요소 해석

This Article

  • 2013; 26(4): 207-212

    Published on Aug 31, 2013