Original Article
  • A Study on the Sinterning of the Carbon Nanotube/Metal Composites for the Heat Transfer Enhancement
  • XiRu Zheng*, Min Soo Kim**, Chan Woo Park**†
  • *전북대학교 기계설계공학부 대학원 , **전북대학교 기계설계공학부,**†전북대학교 기계설계공학부, Corresponding author (E-mail: cw-park@jbnu.ac.kr)
  • 열전달 촉진을 위한 탄소나노튜브(CNT)/금속 복합체 소결 코팅에 관한 연구
  • 정희여* , 김민수** , 박찬우**†
Abstract
The coating of metal surface with carbon nanotubes (CNTs) has been studied for the heat transfer enhancement of the boiling and condensation of refrigerant. The MWCNT/copper composite powder was made by the attrition ball milling, which has been coated on the copper wafer by electrostatic powder coating and sintered with electric furnace. In this paper, experiments were performed to assess the characterization and comparison of CNT before and after sinterning and the morphology changes of the CNT/Cu-coated surface. The samples were examined by the scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX) and raman spectroscopy. To verify the heat transfer enhancement, boiling heat transfer tests were performed.

냉매의 비등이나 응축같은 열전달 향상을 위하여 금속 표면위에 탄소나노튜브(CNT)를 코팅하는 것을 연구하였다. 다중벽 탄소나노튜브/구리 복합소재는 어트리션 볼밀에 의해서 제작되었으며, 정전 도장 장치로 복합분말을 구리 기판위에 코팅한 후 전기로에서 소결하였다. 본 논문에서는 CNT/Cu 코팅 표면의 분석 및 소결전후의 탄소나노튜브의 변화를 파악하기 위하여 샘플들을 주사전자현미경, EDAX, 라만분광법에 의해 분석하였다. 아울러 열전달 촉진은 비등열전달로 확인하였다.

Keywords: heat transfer, sintering, carbon nanotube, copper, composite

Keywords: 열전달, 소결, 탄소나노튜브, 구리, 복합재료

This Article

  • 2013; 26(6): 373-379

    Published on Dec 31, 2013