Original Article
  • 표면 처리에 따른 알루미늄-탄소 섬유 복합재료 접합부의 부식 열화 및 전단 물성 분석

  • Daeyong Shin*, Jaeyoung Han*, Gyeongtae Kim*, Joon Seok Lee*† , Hyunchul Ahn*†

  • * Department of Fiber System Engineering, Yeungnam University, Gyeongsan 38541, Korea

  • Analysis of Corrosion Degradation and Shear Properties of Aluminum/Carbon Fiber-Reinforced Composite Dissimilar Joints according to Surface Treatments

  • 신대용* · 한재영* · 김경태* · 이준석*† · 안현철*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Jang, Y.Y., Ha, J.C., Lee, D., Lee, Y., Nam, S.Y., Yang, S.B., and Kwon, D.J., “Dissimilar Material Bonding Technology for Lightweight Future Mobility: A Review,” Polymer Testing, Vol. 129, 2023, Article No. 108281.
  •  
  • 2. Han, S., Guang, X., Li, Z., and Li, Y., “Joining Processes of CFRP‐Al Sheets in Automobile Lightweighting Technologies: A Review,” Polymer Composites, Vol. 43, No. 12, 2022, pp. 8622-8633.
  •  
  • 3. Borrie, D., Al-Saadi, S., Zhao, X.L., Raman, R.K.S., and Bai, Y., “Bonded CFRP/steel Systems, Remedies of Bond Degradation and Behaviour of CFRP Repaired Steel: An Overview,” Polymers, Vol. 13, No. 9, 2021, Article No. 1533.
  •  
  • 4. Zheng, G., He, Z., Wang, K., Liu, X., Luo, Q., Li, Q., and Sun, G., “On Failure Mechanisms in CFRP/Al Adhesive Joints after Hygrothermal Aging Degradation Following by Mechanical Tests,” Thin-Walled Structures, Vol. 158, 2021, Article No. 107184.
  •  
  • 5. Kwon, D.J., Kim, J.H., Kim, Y.J., Kim, J.J., Park, S.M., Kwon, I.J., Shin, P.S., DeVries, L.K., and Park, J.M., “Comparison of Interfacial Adhesion of Hybrid Materials of Aluminum/carbon Fiber Reinforced Epoxy Composites with Different Surface Roughness,” Composites Part B: Engineering, Vol. 170, 2019, pp. 11-18.
  •  
  • 6. Hu, Y., Yuan, B., Cheng, F., and Hu, X., “NaOH Etching and Resin Pre-coating Treatments for Stronger Adhesive Bonding between CFRP and Aluminium Alloy,” Engineering, Vol. 178, 2019, Article No. 107478.
  •  
  • 7. Huang, Y., Sarkar, D.K., and Chen, X.G., “Superhydrophobic Aluminum Alloy Surfaces Prepared by Chemical Etching Process and Their Corrosion Resistance Properties,” Applied Surface Science, Vol. 356, 2015, pp. 1012-1024.
  •  
  • 8. Schanz, J., Nester, S., Meinhard, D., Pott, T., Riegel, H., De Silva, A.K.M., Harrison, D.K., and Knoblauch, V., “Adhesively Bonded CFRP/Al Joints: Influence of the Surface Pretreatment on Corrosion during Salt Spray Test,” Materials and Corrosion, Vol. 73, No. 2, 2022, pp. 158-170.
  •  
  • 9. Kobayashi, S., Yanagisawa, K., Osada, T., and Morimoto, T., “Effect of Corrosion on Mechanical Properties for CFRP/aluminum Adhesive Joints under a Salt Spray Environment,” Mechanical Engineering Journal, Vol. 10, No. 3, 2023, Article No. 23-00203.
  •  
  • 10. Zhang, Z., Shan, J.G., Tan, X.H., and Zhang, J., “Effect of Anodizing Pretreatment on Laser Joining CFRP to Aluminum Alloy A6061,” International Journal of Adhesion and Adhesives, Vol. 70, 2016, pp. 142-151.
  •  
  • 11. Håkansson, E., Hoffman, J., Predecki, P., and Kumosa, M., “The Role of Corrosion Product Deposition in Galvanic Corrosion of Aluminum/Carbon Systems,” Corrosion Science, Vol. 114, 2017, pp. 10-16.
  •  
  • 12. Ge, Z., Hu, Q., Pang, K., Zhu, Y., and Hou, X., “Significantly Improves the Mechanical Strength of Aluminum Alloy Adhesive Joint Through Electrochemical Pretreatment in Environmentally Friendly Medium,” Journal of Manufacturing Processes, Vol. 133, 2025, pp. 592-606.
  •  

This Article

Correspondence to

  • Joon Seok Lee * , Hyunchul Ahn *

  • * Department of Fiber System Engineering, Yeungnam University, Gyeongsan 38541, Korea

  • E-mail: hyunchul.ahn@yu.ac.kr